
	Microsemi Electronic Components Datasheet

1N6047 Datasheet

1500 WATT BIDIRECTIONAL TRANSIENT VOLTAGE SUPPESSOR

No Preview Available !

1N6036(A) thru 1N6072(A)

Available on

commercial

versions

1500 WATT BIDIRECTIONAL

TRANSIENT VOLTAGE SUPPESSOR

Qualified per MIL-PRF-19500/507

DESCRIPTION

This popular Transient Voltage Suppressor (TVS) series for 1N6036 thru 1N6072A are JEDEC

registered selections for bidirectional devices. All have the same high Peak Pulse Power

rating of 1500 W with extremely fast response times. They are also available in military

qualified selections as described in the “Features” section herein. They are most often used

for protecting against transients from inductive switching environments, induced RF effects, or

induced secondary lightning effects as found in lower surge levels of IEC61000-4-5. They are

also very successful in protecting airborne avionics and electrical systems. Since their

response time is virtually instantaneous, they can also protect from ESD and EFT per

IEC61000-4-2 and IEC61000-4-4.

Qualified Levels:

JAN, JANTX, and

JANTXV

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

• Bidirectional TVS series in axial packages for thru-hole mounting.

• Suppresses transients up to 1500 watts @ 10/1000 µs (see Figure 1).

• Clamps transients in less than 100 pico seconds.

• Working voltage (VWM) range 5.5 V to 185 V.

• Hermetically sealed DO-13 metal package.

• JAN, JANTX, JANTXV military qualifications also available per MIL-PRF-19500/507 for the tighter

tolerance “A” suffix types by adding the JAN, JANTX, or JANTXV prefix, e.g. JANTXV1N6036A,

etc.

• RoHS compliant versions available (commercial grade only).

APPLICATIONS / BENEFITS

• Protection from switching transients and induced RF.

• Protection from ESD & EFT per IEC 61000-4-2 and IEC 61000-4-4.

• Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance:

Class 1: 1N6036 to 1N6072A

Class 2: 1N6036 to 1N6067A

Class 3: 1N6036 to 1N6061A

Class 4: 1N6036 to 1N6054A

• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:

Class 1: 1N6036 to 1N6064A

Class 2: 1N6036 to 1N6057A

Class 3: 1N6036 to 1N6049A

Class 4: 1N6036 to 1N6042A

• Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance:

Class 2: 1N6036 to 1N6048A

Class 3: 1N6036 to 1N6041A

• Inherently radiation hard as described in Microsemi “MicroNote 050”.

DO-13 (DO-202AA)

Package

Also available in:

DO-13 package

(unidi rectio nal)

1N5629 – 1N5665A

Case 1 package

(plastic equivalent)

1.5KE6.8C – 1.5KE220CA

DO-215AB package

(Gull-wing)

SMCG5.0 – SMCG170A

DO-214AB package

(J-bend)

SMCJ5.0 – SMCJ170A

MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841

Tel: 1-800-446-1158 or

(978) 620-2600

Fax: (978) 689-0803

MSC – Ireland

Gort Road Business Park,

Ennis, Co. Clare, Ireland

Tel: +353 (0) 65 6840044

Fax: +353 (0) 65 6822298

Website:

www.microsemi.com

T4-LDS-0097, Rev. 3 (120714)

Page 1 of 7


	Microsemi Electronic Components Datasheet

1N6047 Datasheet

1500 WATT BIDIRECTIONAL TRANSIENT VOLTAGE SUPPESSOR

No Preview Available !

1N6036(A) thru 1N6072(A)

MAXIMUM RATINGS

Parameters/Test Conditions

Junction and Storage Temperature

Peak Pulse Power @ TL = +25 ºC (1)

Rated Average Power Dissipation @ TL ≤ +125 ºC (2)

Solder Temperature @ 10 s

Symbol

TJ and TSTG

P PP

P M(AV)

TSP

Value

-55 to +175

1500

260

Notes: 1. At 10/1000 us with repetition rate of 0.01% or less (see Figures 1, 2, & 4).

2. At 10 mm from body (see derating in Figure 3 and note below).

Unit

ºC

MECHANICAL and PACKAGING

• CASE: DO-13 (DO-202AA), welded, hermetically sealed metal and glass.

• TERMINALS: All external metal surfaces are tin-lead plated and solderable per MIL-STD-750 method 2026.

• MARKING: Part number.

• POLARITY: Not applicable for bidirectional TVS.

• TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.

• WEIGHT: Approx 1.4 grams.

• See Package Dimensions on last page.

Reliability Level

JAN = JAN level

JANTX = JANTX level

JANTXV = JANTXV level

(All of the above require “A” suffix)

Blank = Commercial

JEDEC type number

(See Electrical Characteristics

table)

PART NOMENCLATURE

JAN 1N6036 A (e3)

RoHS Compliance

e3 = RoHS compliant (available

on commercial grade only)

Blank = non-RoHS compliant

Voltage Tolerance

A = 5%

Blank = 10%

Symbol

VWM

V (BR)

IPP

P PP

I(BR)

SYMBOLS & DEFINITIONS

Definition

Standoff Voltage: Applied Reverse Voltage to assure a nonconductive condition.

Breakdown Voltage: This is the Breakdown Voltage the device will exhibit at 25 oC.

Maximum Clamping Voltage: The maximum peak voltage appearing across the TVS when subjected to the peak pulse

current in a one millisecond time interval. The peak pulse voltage is the combination of voltage rise due to both the

series resistance and thermal rise and positive temperature coefficient (αV(BR)).

Peak Pulse Current: The peak current during the impulse. (See Figure 2)

Peak Pulse Power: The pulse power as determined by the product of VC and IPP.

Standby Current: The current at the standoff voltage (VWM).

Breakdown Current: The current used for measuring Breakdown Voltage (V(BR)).

T4-LDS-0097, Rev. 3 (120714)

Page 2 of 7

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf

1N6047 Datasheet

1500 WATT BIDIRECTIONAL TRANSIENT VOLTAGE SUPPESSOR

1N6047 Datasheet

1500 WATT BIDIRECTIONAL TRANSIENT VOLTAGE SUPPESSOR

Similar Datasheet

Part Number Start With