2N685 Datasheet | Microsemi

DESCRIPTION This silicon controlled rectifier device is military qualified up to a JANTX level for high-reliability applications. Qualified Levels: JAN and JANTX Important: For the latest information, visit our website http://.microsemi.. FEATURES - JEDEC registered 2N682, 2N683, 2N685, and 2N687 - 2N692. - JAN and JANTX qualifications are available per MIL-PRF-19500/108. - Ro HS pliant versions available (mercial grade only). APPLICATIONS / BENEFITS - A general purpose, reverse-blocking thyristor. TO-208 / TO-48 Package MAXIMUM RATINGS Parameters/Test Conditions Junction Temperature Storage Temperature Gate Voltage (Peak Total Value) Maximum Average DC Output Current (1) Non-repetitive Peak On-State Current (2) @ t = 7 ms Symbol TJ T STG V GM IO I TSM Value -65 to +125 -65 to +150 5 16 150 Unit o C o C V(pk) Notes: 1. This average forward current is for a maximum case temperature of +65 °C, and 180 electrical degrees of conduction. 2. Surge rating is non-recurrent and applies only with device in the conducting state. The peak rate of surge current must not exceed 100 amperes during the first 10 μs after switching from the off (blocking) state to the on (conducting) state. This time is measured from the point where the thyristor voltage has decayed to 90 percent of its initial blocking value. - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: .microsemi. T4-LDS-0249, Rev. 2 (4/25/13) ©2013 Microsemi Corporation Page 1 of 6 2N682, 2N683, and 2N685 - 2N692 MECHANICAL and PACKAGING - CASE: Nickel plated copper. - TERMINALS: Nickel plated steel, solder dipped or Ro HS pliant matte-tin plating (on mercial and CDS grade...