LXMG221D-0700040-D2F Datasheet | Microsemi

.Data Sheet.co.kr LXMG221D-0700040-D2F LXMG2203 TM ® 40W 700m A Dimmable HV LED Driver Module P RODUCTION D ATASHEET - DESCRIPTION KEY Features - High Voltage AC Input: 347VAC to 480VAC - High Efficiency - Active Power Factor Correction - Constant Current 700m A - Dimming Input Provides 10% to 100% Range, Plus Shutdown - Anode Supply Adjusts for String Voltage between 40V and 57V - Small pact Size - Suitable for Damp Locations (IP66) - UL8750 & UL1310 - UL File E337545 - FCC Class B - Long Life Expectancy - Ro HS pliant - Full Protection: OVP, SCP, OTP, Maximum Power Limit - Unique Fault Detection and Management - The LXMG221D-0700040-D2F is a fully enclosed pact solid-state LED lighting driver module. It operates from a universal AC input supply in the range of 347VAC to 480VAC, 60Hz to drive a string of LEDs with active power factor correction. LED string voltage can range from 40V to 57V at a constant current of 700m A. Control terminal leads include a dimming input BRITE A with a dedicated RETURN lead. The amplitude of the output LED string current will vary from 10% to 100% corresponding to a 1VDC to 10VDC signal on the BRITE A input following the 0V to 10V ESTA E1.3-2001 Analog Control Specification Standard. The BRITE A terminal when pulled down below minimum dimming will turn off the LEDs and enter a low power consumption mode. A second control terminal lead provides a FAULT indicator. In the case that there is an LED string short between OUTPUT(+) and OUTPUT(-), or string open, or a product over temperature condition the FAULT terminal will go low. The FAULT terminal includes an open collector device that can be pulled up to a maximum of 60V and will sink 8m A typical to 0.8V when a short or open fault occurs. To reduce audible noise the internal switching frequency remains above 30k Hz. Safety Features include open output circuit protection, whole string short circuit protection. The maximum allowable hot spot case temperature is 90°C (above...