Datasheet4U Logo Datasheet4U.com

MPT-36 - 1500 Watt Low Clamping Factor Transient Voltage Suppressor

Download the MPT-36 datasheet PDF. This datasheet also covers the MPT-10 variant, as both devices belong to the same 1500 watt low clamping factor transient voltage suppressor family and are provided as variant models within a single manufacturer datasheet.

General Description

This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices.

Key Features

  • Screening in reference to MIL-PRF-19500 available.
  • Unidirectional and bidirectional TVS series in axial package for thru-hole mounting.
  • Suppresses transients up to 1500 watts @ 10/1000 µs (see figure 1).
  • tclamping (0 volts to V(BR) min): Unidirectional.
  • Less than 100 picoseconds. Bidirectional.
  • Less than 5 nanoseconds.
  • Working voltage (VWM) range 10 V to 45 V.
  • Low clamping factor (ratio of actual VC/VBR): 1.33 @ full rated powe.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MPT-10-Microsemi.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription for MPT-36 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for MPT-36. For precise diagrams, and layout, please refer to the original PDF.

1N6358 – 1N6372 or MPT-10 – MPT-45C Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N...

View more extracted text
ssor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6358 through 1N6364 are unidirectional and the 1N6366 through 1N6372 are bidirectional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5.

More Datasheets from Microsemi (now Microchip Technology)

Part Number Description
MPT-36C 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-10 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-10C 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-12 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-12C 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-15 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-15C 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-18 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-18C 1500 Watt Low Clamping Factor Transient Voltage Suppressor
MPT-22 1500 Watt Low Clamping Factor Transient Voltage Suppressor