Datasheet4U Logo Datasheet4U.com

LX8820 - 3.3V/1.0A Ultra Low Dropout Regulator

General Description

The LX8820 is an ultra lowdropout single output positivevoltage linear regulator.

The regulator has a precise, fixed output capable of delivering 1.2 amps.

The LX8820 output is internally programmed for 3.3V.

Key Features

  • Accurate Output Voltage.
  • Typical Dropout of 0.7V at 1A and 0.25V at 0.8A.
  • Independent Thermal and Current Limit Protection.
  • Low Tolerance Load Regulation (0.4%).
  • Wide DC Supply Voltage of 4V to 10V.
  • Loop Stability Independent of Output Capacitor Type.
  • JEDEC MO-229 surface mount package / RoHS Compliant.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LX802 SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR Polyfet RF Devices
LX803 SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR Polyfet RF Devices
LX803DE 0.8Amp Sensitive Triacs Littelfuse
LX803DT 0.8Amp Sensitive Triacs Littelfuse
LX803ME 0.8Amp Sensitive Triacs Littelfuse

Other Datasheets by Microsemi (now Microchip Technology)

Part Number Description
LX8821 DUAL CHANNEL 2.5A LOW DROPOUT REGULATOR
LX8815 Dual Channel 1A Low Dropout Regulator
LX8816 Dual Channel 1A Low Dropout Regulator
LX8817 Dual Channel 2.5A Low Dropout Regulator
LX8819 Dual Channel 1A Low Dropout Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LX8820 TM ® 3.3V/1.0A Ultra Low Dropout Regulator P RODUCTION DATA SHEET DESCRIPTION The LX8820 is an ultra lowdropout single output positivevoltage linear regulator. The regulator has a precise, fixed output capable of delivering 1.2 amps. The LX8820 output is internally programmed for 3.3V. Regulator stability is maintained www.DataSheet4U.com with any capacitor ESR, allowing ceramic, tantalum or electrolytic types. Capacitance range is flexible beginning with 2.2µF to large values. The CMOS wafer process increasing regulator efficiency by minimizing operating ground current (typically <200µA). compared to BiPolar technology . The low RDSON of the PMOS output stage results in ultra low dropout (typically 0.45V @ 1A).