AME270461
AME270461 is EMI Filter manufactured by Micross.
Features
- Up to 1.5A Maximum input current
- Attenuation > 35d B @ 200 KHz
- Low Profile (0.38”) seam welded package
- Ceramic feed thru copper-core pins
- Operation over full military temp. range
- Standard military drawings available
Product Summary
- Part number: AME270461W/CH (98026-01HUA/HUC), AME270461X/CH (98026-01HXA/HXC), AME270461Y/CH (98026-01HYA/HYC), AME270461Z/CH (98026-01HZA/HZC)
Potential Applications
- DC-DC converter
Product Validation
Validated according to MIL-PRF-38534 for high-reliability applications
Ordering Information
Table 1
Ordering Information
Part number
AME270461W/CH
AME270461X/CH
AME270461Y/CH
AME270461Z/CH
98026-01HUA/HUC
98026-01HXA/HXC
98026-01HYA/HYC
98026-01HZA/HZC
Package AME AME AME AME AME AME AME AME
Screening Level COTS COTS COTS COTS MIL-PRF-38534 MIL-PRF-38534 MIL-PRF-38534 MIL-PRF-38534
.micross.
Please read the Important Notice and Warnings at the end of this document page 1 of 12
2022-05-05
AME270461 Series
400V Input, Single and Dual Output
Description
Description
The AME Series of EMI filters have been designed to provide full pliance with the input line reflected ripple current requirement specified by CE03 of MILSTD-461C over the full military temperature range while operating in conjunction with the corresponding AFL series of DC-DC converters. These filters are offered as part of a plete family of conversion products providing single and dual output voltages while operating from nominal +270 input line voltage. Other converters operating with a similar switching frequency will also benefit by use of this device
These EMI filters are hermetically packaged in two enclosure variations, utilizing copper-core pins to minimize resistive DC losses. Three lead styles are available, each fabricated with IR Hi Rel’s rugged ceramic lead-topackage seal assuring long term hermetic seal integrity in harsh environments.
Manufactured in a facility fully qualified to MIL-PRF-38534, these converters are...
