07 February 2003
30 October 2001
MICROCIRCUITS, LINEAR, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
This specification is approved for use by all Departments and Agencies of the Department of Defense.
Inactive for new design after 13 July 1995.
1.1 Scope. This specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product
assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete
part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part number. The complete part number shall be in accordance with MIL-PRF-38535, and as specified herein..
1.2.1 Device types. The device types shall be as shown in the following:
01 Single operational amplifier - internally compensated
02 Dual operational amplifier - internally compensated
03 Single operational amplifier - externally compensated
04 Single operational amplifier - externally compensated
05 Dual operational amplifier - externally compensated 1/
06 Dual operational amplifier - externally compensated 1/
07 Single operational amplifier, high speed
08 Dual operational amplifier - internally compensated
1.2.2 Device class. The device class shall be the product assurance level as defined in MIL-PRF-38535.
1/ Device types 05 and 06 may be monolithic, or they may consist of two separate, independent die.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be use
in improving this document should be addressed to: Commander, Defense Supply Center Columbus,
ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.