900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Mimix Broadband

CMM2030-BD Datasheet Preview

CMM2030-BD Datasheet

GaAs MMIC Optical Modulator Driver Amplifier

No Preview Available !

30 kHz-30 GHz GaAs MMIC
Optical Modulator Driver Amplifier
August 2006 - Rev 02-Aug-06
Features
Small Size
High Gain: 12 dB Typical
P1dB = +18 dBm, Typical
30 kHz to 30 GHz Bandwidth
Low Gain Ripple: 1.0 dB pp Typical
Sub 0.25 Micron PHEMT
Low DC Power Consumption
Chip Diagram
Applications
Input Stage Driver for LiNb03 Modulator
Driver Amplifier @ OC-192
Medium Power Linear Gain Block for
Broadband Systems
Receive Amplifier for OC-192
Units in Microns
CMM2030-BD
Description
The CMM2030-BD is a precision GaAs MMIC,
medium power amplifier and is part of Celeritek’s family of
www.DataSheet4U.comWideFiber™ products for optical communications applica-
tions.
The CMM2030-BD optical driver amplifier gives
fiber optic system designers a unique combination of wide-
band frequency coverage, along with a flat response and very
low internal jitter. It is a precision PHEMT GaAs MMIC
medium power amplifier with +18 dBm @ P1dB. It operates
from 30 kHz to 32 GHz with 12 dB linear gain. Low internal
jitter makes it especially well suited for high speed digital
data applications.
It is an excellent choice as an input stage amplifier for
Lithium Niobate (Mach-Zehnder) external modulator driver
amplifiers for OC-192/STM64 metropolitan and long-haul
dense wave-division multiplexed optical networking applica-
tions and other high speed applications.
When used as an amplifier to drive Celeritek’s
CMM3030-BD as much as 7.5 V peak-to-peak can be
achieved.
CMM2030-BD amplifiers are shipped in Gel Pack
from Celeritek’s foundry.
Specifications (TA = 25°C, VDD = 5V) (On-Wafer Probe)
Parameters
Units
Frequency Range
Small Signal Gain
Gain Flatness
Input VSWR
Output VSWR
Power Output (@1 dB Gain Compression) @ 9 GHz
Current
dB
±dB
dBm
mA
Min
30 kHz
10.0
Typ
12.0
0.6
1.8:1
1.7:1
+18.0
100
Max
30.0 GHz
150
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 4
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.




Mimix Broadband

CMM2030-BD Datasheet Preview

CMM2030-BD Datasheet

GaAs MMIC Optical Modulator Driver Amplifier

No Preview Available !

30 kHz-30 GHz GaAs MMIC
Optical Modulator Driver Amplifier
August 2006 - Rev 02-Aug-06
CMM2030-BD
Absolute Maximum Ratings
Parameter
Rating
Drain Voltage
Gate Voltage
Drain Current
Continuous Power Dissipation
Channel Temperature
Storage Temperature
Mounting Temperature
Input Power
12 V
-5 V
375 mA
3.0 W
+175°C
-65°C to +175°C
+320°C
+23 dBm
Die Attach and Bonding Procedures
Die Attach: Eutectic die attach is recommended. For eutec-
tic die attach: Preform: AuSn (80% Au, 20% Sn); Stage
Temperature: 290°C, ±5°C; Handling Tool: Tweezers; Time: 1
min or less.
Wire Bonding: Wire Size: 0.7 to 1.0 mil in diameter (pre-
stressed); Thermocompression bonding is preferred over
thermosonic bonding. For thermocompression bonding:
Stage Temperature: 250°C; Bond Tip Temperature: 150°C;
Bonding Tip Pressure: 18 to 40 gms depending on size of
wire.
Typical Performance
P1dB vs Frequency
Performance Optimization
Using the Gain-Ctl facility of the CMM2030-BD, out-
put power may be increased by application of 1.2 to 1.8 Volts
to the Bias Control pad. If the Gain-Ctl facility is not used, a
fixed voltage at the Bias Control pad can be implemented by
connecting a off-chip parallel resistor to the pad which will
lower the output voltage accordingly.
If Bias Control voltage is decreased further than those
lowest values given in the tables, both gain and output power
will start to drop.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 4
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.


Part Number CMM2030-BD
Description GaAs MMIC Optical Modulator Driver Amplifier
Maker Mimix Broadband
Total Page 4 Pages
PDF Download

CMM2030-BD Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 CMM2030-BD GaAs MMIC Optical Modulator Driver Amplifier
Mimix Broadband
2 CMM2030-BD GAAS MMIC OPTICAL MODULATOR DRIVER AMPLIFIER
Celeritek





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy