Datasheet4U Logo Datasheet4U.com

XR1004 - GaAs MMIC Receiver

Description

Sub-harmonic Receiver Integrated LNA, LO Doubler/Buffer, Image Reject Mixer +4.0 dBm Input Third Order Intercept (IIP3) +2.0 dBm LO Drive Level 9.0 dB Conversion Gain 3.5 dB Noise Figure 18.0 dB Image Rejection 100% On-Wafer RF, DC and Noise Figure Testing 100% Visual Inspection to MIL-STD-883 Meth

Features

  • Mimix Broadband’s 30.0-46.0 GHz GaAs MMIC receiver has a noise figure of 3.5 dB and 18.0 dB image rejection across the band. This device is a three stage LNA followed by an image reject resistive pHEMT mixer and includes an integrated LO doubler and LO buffer amplifer. The image reject mixer eliminates the need for a bandpass filter after the LNA to remove thermal noise at the image frequency. The use of integrated LO doubler and LO buffer amplifier makes the provision of the LO easier than for.

📥 Download Datasheet

Datasheet preview – XR1004

Datasheet Details

Part number XR1004
Manufacturer Mimix Broadband
File Size 395.79 KB
Description GaAs MMIC Receiver
Datasheet download datasheet XR1004 Datasheet
Additional preview pages of the XR1004 datasheet.

📁 Similar Datasheet

  • XR1004-BD - Receiver (MA-COM)
  • XR1008 - Rail-to-Rail Amplifiers (Exar)
  • XR1008-QB - Receiver (MA-COM)
  • XR1009 - Rail-to-Rail Amplifiers (Exar)
  • XR1011-QH - Receiver (MA-COM)
  • XR1015 - (XR1016) Seventh Order Elliptic / Low Pass Filters (Exar)
  • XR1015-QH - Receiver (MA-COM)
  • XR1020-QH - Receiver (MA-COM)
  • XR1071 - High Definition Audio Processor (EXAR)
  • XR1075 - Audio Processor (EXAR)
Other Datasheets by Mimix Broadband

Full PDF Text Transcription

Click to expand full text
30.0-46.0 GHz GaAs MMIC Receiver May 2005 - Rev 13-May-05 Features Mimix Broadband’s 30.0-46.0 GHz GaAs MMIC receiver has a noise figure of 3.5 dB and 18.0 dB image rejection across the band. This device is a three stage LNA followed by an image reject resistive pHEMT mixer and includes an integrated LO doubler and LO buffer amplifer. The image reject mixer eliminates the need for a bandpass filter after the LNA to remove thermal noise at the image frequency. The use of integrated LO doubler and LO buffer amplifier makes the provision of the LO easier than for fundamental mixers at these frequencies. I and Q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband. This MMIC uses Mimix Broadband’s 0.
Published: |