Datasheet4U Logo Datasheet4U.com

MC2045-2 - Fiberoptic Postamplifier

Description

The MC2045-2 is a second-generation, high gain limiting amplifier intended for fiberoptics based communications to 200Mbps.

Normally placed following the photodetector and transimpedance or pre-amplifier, the limiting amplifier provides the necessary gain to give ECL compatible logic outputs.

Features

  • Low-cost IC, available as die or in SOIC16, TSSOP20 and QSOP16 packages. Fabricated in advanced submicron BiCMOS process. Pin-compatible, superior replacement for Signetics NE5224/5. SONET, FDDI, ESCON compatible. Programmable input-signal level detector. Fully differential. Input sensitivity better than 0.8mV at 155Mbps, permitting system sensitivities better than -38dBm (BER 10-9). Fully supports 3.3V and 5V supplies. Differential PECL data and level detect outputs. MC2045-2 Postamplifier/Qu.

📥 Download Datasheet

Datasheet preview – MC2045-2

Datasheet Details

Part number MC2045-2
Manufacturer Mindspeed Technologies
File Size 135.19 KB
Description Fiberoptic Postamplifier
Datasheet download datasheet MC2045-2 Datasheet
Additional preview pages of the MC2045-2 datasheet.

📁 Similar Datasheet

  • MC2040 - THICK FILM CHIP RESISTOR (RCD)
  • MC2002 - 6 SEGMENT X 7 GRID LED DRIVER (ABOV)
  • MC2002-01 - Standard LCD (Bona)
  • MC2004-01 - Standard LCD (Bona)
  • MC2004-06 - Standard LCD (Bona)
  • MC2004E - LCD (EVERBOUQUET)
  • MC2004E - LCD (ETC)
  • MC2006 - (MC2xx6) Dual 4-Input Expander (Motorola Semiconductor)
  • MC201 - Serial Converter Introduction (3onedata)
  • MC201 - Pluggable PCB Connector (ETC)
Other Datasheets by Mindspeed Technologies

Full PDF Text Transcription

Click to expand full text
Fiberoptic Postamplifier Main Features Low-cost IC, available as die or in SOIC16, TSSOP20 and QSOP16 packages. Fabricated in advanced submicron BiCMOS process. Pin-compatible, superior replacement for Signetics NE5224/5. SONET, FDDI, ESCON compatible. Programmable input-signal level detector. Fully differential. Input sensitivity better than 0.8mV at 155Mbps, permitting system sensitivities better than -38dBm (BER 10-9). Fully supports 3.3V and 5V supplies. Differential PECL data and level detect outputs. MC2045-2 Postamplifier/Quantiser for applications to 200Mbps General Description The MC2045-2 is a second-generation, high gain limiting amplifier intended for fiberoptics based communications to 200Mbps.
Published: |