• 2.8V & 5V operation
• Micro-miniature size .120”X.120”
• Internal DC blocking at RF input and output
• High directivity, 17 dB typ.
• Low noise figure, 2.9 dB typ.
• Output power, up to +18 dBm typ.
• Excellent repeatability
• Low cost
• Aqueous washable
CASE STYLE: DQ849
PRICE:Contact Sales Dept.
• Buffer amplifier
• Communications satellite
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Not Recommended for New Designs
please refer to PCN# 15-054 and
recommended replacement at :
or PCN History on Dash Board
MNA-6+ is a wideband amplifier offering high dynamic range. It has repeatable performance from lot to lot.
It is enclosed in a 3x3 mm MCLP plastic package. MNA-6+ is fabricated using GaAs MESFET technology.
Expected MTBF at 85°C case temperature is 45,000 years at 2.8V; 7,000 years at 5V.
2 RF input pin
5 RF output pin
7, with 1000 pF bypass to ground; connect pin 8 via 33 ohms to pin 7 externally
3,4 and paddle in center of bottom
1,6 No internal connection; recommended use: per PCB Layout PL-078
Connections to ground
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 firstname.lastname@example.org
Page 1 of 4