Ultra Low Noise, High IP3
50Ω 0.7 to 1.6 GHz
The Big Deal
• Ultra Low Noise Figure, 0.5 dB
• High Gain, High IP3
• Class 1B HBM ESD (500V)
• May be used as a replacement for MGA-631P8 a,b
2mm x 2mm
☛ LTE Performance
Mini-Circuits PMA2-162LN+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier with a unique combina-
tions of low noise and high IP3 making this amplifier ideal for sensitive high dynamic range receiver applica-
tions. This design operates on a single 4V supply.
Ultra Low Noise, 0.5 dB at 1.0 GHz
Outstanding world class noise figure performance.
High IP3, +30 dBm at 1.0 GHz
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for use in Low
Noise Receiver Front End (RFE) as it gives the user advantages at both ends of the
dynamic range: sensitivity & two-tone IM performance.
2mm x 2mm 8 lead MCLP Package
Max Input Power, +25 dBm
By changing feedback resistor R1, gain can be changed from19.7 to 23.5 dB at 1GHz
Low Inductance, repeatable transitions, excellent thermal contact to PCB
Ruggedized design operates up to high input powers often seen at Receiver inputs
eliminating the need for an external resistor.
Low, small signal operating current of 55 mA nominal maintains junction temperatures
typically below 100°C at 85°C ground lead temperature.
Class 1B ESD (500V HBM)
The PMA2-162LN+ is a super low noise PHEMT based design. Mini-Circuits incor-
porates ESD protection on die to achieve industry leading ESD performance for a low
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical
performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The Avago MGA-631P8 part number is used for identification and comparison purposes only.
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 firstname.lastname@example.org
Page 1 of 5