ML1001 - Static LCD COG Driver

Datasheet Details

ML1001 static LCD COG (chip on glass) driver is 40 segments LCD driver with gold bump.

l l l l l l l l l A Gold Bump Chip without external component. Logic & LCD power supply: 2.0V to 6.0V Typical Current consumption: 25uA at VIN = 3V & no load condition. Number of segments: 40 Cascade the ML1001 to form a single piece of 80 or 120 segments LCD driver. Simple 3 pin microcontroller interface through DIN, DCLK & LOAD. Blink of the display data. Offer best contrast and widest viewing angle of TN LCD technology. No temperature compensation needed for Topr = -40oC to 80oC. v General D.

📁 ML1001 Similar Datasheet

ML1000605D - HIGH RELIABILITY RADIATION HARDENED LOW POWER DC-DC CONVERTER (IRF)
ML100PS2PG - PRESSURE SENSORS (Honeywell)
ML1012R - a high power AlGaInP semiconductor laser (Mitsubishi)
ML1013R - a high power AlGaInP semiconductor laser (Mitsubishi)
ML1016R - a high power AlGaInP semiconductor laser (Mitsubishi)
ML101J10 - a high power AlGaInP semiconductor laser (Mitsubishi)
ML101J14 - a high power AlGaInP semiconductor laser (Mitsubishi)
ML101J18 - LASER DIODES (Mitsubishi Electric)

Other Datasheets by Minilogic Device

Published: Oct 2, 2010 |