Datasheet4U Logo Datasheet4U.com

M62005FP Datasheet Low Power 2 Output System Reset Ic Series

Manufacturer: Mitsubishi Electric

Overview: MITSUBISHI M62001L,FP/M62002L,FP/M62003L,FP/M62004L,FP/ M62005L,FP/M62006L,FP/M62007L,FP/M62008L,FP LOW POWER 2 OUTPUT SYSTEM RESET IC.

General Description

The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microputer system in order to reset or release the microputer system.

The M62001~8 carry out voltage detection in 2 steps and have 2 output pins.As Bi-CMOS process and low power dissipating circuits are employed,they output optimum signals through each output pin to a system that requires RAM backup, As output signals,interruption(INT) and pulsive reset(RESET) signals are available.The interruption signal(INT) is used to alter the microputer from normal mode to backup mode and vice versa.

these output signals are classified into pulse type(M62001~M62004) and hold type (M62005~M62008).

Key Features

  • Bi-CMOS process realizes a configuration of low current dissipating circuits. Circuit current Icc=5µA(Typ. ,normal mode,Vcc=5.0V) Icc=1µA(Typ. ,backup mode,Vcc=2.5V).
  • Two-step detection of supply voltage Detection voltage in normal mode (2 types) Vs=4.45V/4.25V(Typ. ) Detection voltage in backup mode VBATT=2.15V(Typ. ).
  • Two outputs Reset output (RESET):Output of compulsive reset signal Interruption output(INT):Output of interruption signal.
  • Two types of output forms.

M62005FP Distributor