Datasheet4U Logo Datasheet4U.com

RA45H4045MR - 3 Stage Amp

Description

The RA45H4045MR is a 45-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 400- to 450-MHz range.

The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors.

Features

  • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=12.5V, VGG=0V).
  • Pout>45W, ηT>35% @ VDD=12.5V, VGG=5V, Pin=50mW.
  • Broadband Frequency Range: 400-450MHz.
  • Low-Power Control Current IGG=1mA (typ) at VGG=5V.
  • Module Size: 66 x 21 x 9.88 mm.
  • Reverse PIN type.
  • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 2 3 1 4 5 1 2 3 4 5 RF Input (Pin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RA45H4047M MITSUBISHI RF MOSFET MODULE 400-470MHz 45W 12.5V MOBILE RADIO Mitsubishi Electric Semiconductor
RA45H4047M-01 MITSUBISHI RF MOSFET MODULE 400-470MHz 45W 12.5V MOBILE RADIO Mitsubishi Electric Semiconductor
RA45H4047M-E01 MITSUBISHI RF MOSFET MODULE 400-470MHz 45W 12.5V MOBILE RADIO Mitsubishi Electric Semiconductor
RA4505K100-FA Radial PET Film Capacitors CDE
RA4104K250-FA Radial PET Film Capacitors CDE

Other Datasheets by Mitsubishi Electric

Part Number Description
RA45H4452M RoHS Compliance
RA45H7687M1 RoHS Compliance
RA45H8994M1 RoHS Compliance

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com MITSUBISHI RF MOSFET MODULE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA45H4045MR BLOCK DIAGRAM RoHS Compliance , 400-450MHz 45W 12.5V, 3 Stage Amp. For MOBILE RADIO DESCRIPTION The RA45H4045MR is a 45-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 400- to 450-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 4V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 4.
Published: |