Datasheet4U Logo Datasheet4U.com

LM211 - HIGH PERFORMANCE VOLTAGE COMPARATORS

Features

  • ut signal is routed well away from the inputs (Pins 2 and 3) and also away from Pins 5 and 6. However, when the input signal is a voltage ramp or a slow sine wave, or if the signal source impedance is high (1.0 kΩ to 100 kΩ), the comparator may burst into oscillation near the crossing.
  • point. This is due to the high gain and wide bandwidth of comparators like the LM211 series. To avoid oscillation or instability in such a usage, several precautions are recommended, as shown in Figure 15.

📥 Download Datasheet

Datasheet preview – LM211

Datasheet Details

Part number LM211
Manufacturer Motorola
File Size 139.18 KB
Description HIGH PERFORMANCE VOLTAGE COMPARATORS
Datasheet download datasheet LM211 Datasheet
Additional preview pages of the LM211 datasheet.

📁 Similar Datasheet

  • LM211 - Voltage Comparator (National Semiconductor)
  • LM211 - Single Comparators (ON Semiconductor)
  • LM211 - Differential Comparators (Texas Instruments)
  • LM211 - Voltage comparator (STMicroelectronics)
  • LM211 - LCD (Hitachi)
  • LM211-EP - DIFFERENTIAL COMPARATOR (Texas Instruments)
  • LM211-N - Voltage Comparator (Texas Instruments)
  • LM211-Q1 - DIFFERENTIAL COMPARATOR (Texas Instruments)
  • LM211D - Voltage comparator (STMicroelectronics)
  • LM211N - Voltage comparator (STMicroelectronics)
Other Datasheets by Motorola
  • LM201A - OPERATIONAL AMPLIFIERS
  • LM224D - Quad Low Power Operational Amplifier
  • LM224N - Quad Low Power Operational Amplifier
  • LM239 - Quad Single Supply Comparators
  • LM239A - Quad Single Supply Comparators
  • LM248 - Differential Input Operational Amplifiers
  • LM2574 - STEP-DOWN VOLTAGE REGULATOR
  • LM2575 - EASY SWITCHERE 1.0 A STEP-DOWN VOLTAGE REGULATOR

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Order this document by LM311/D Highly Flexible Voltage Comparators The ability to operate from a single power supply of 5.0 V to 30 V or ±15 V split supplies, as commonly used with operational amplifiers, makes the LM211/LM311 a truly versatile comparator. Moreover, the inputs of the device can be isolated from system ground while the output can drive loads referenced either to ground, the VCC or the VEE supply. This flexibility makes it possible to drive DTL, RTL, TTL, or MOS logic. The output can also switch voltages to 50 V at currents to 50 mA. Thus the LM211/LM311 can be used to drive relays, lamps or solenoids.
Published: |