Datasheet4U Logo Datasheet4U.com

MC100E142 - 9-BIT SHIFT REGISTER

Download the MC100E142 datasheet PDF. This datasheet also covers the MC10E142 variant, as both devices belong to the same 9-bit shift register family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC10E142-Motorola.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MC100E142 9-BIT SHIFT REGISTER ON Semiconductor
MC100E141 8-BIT SHIFT REGISTER ON Semiconductor
MC100E143 9-BIT HOLD REGISTER ON Semiconductor
MC100E101 QUAD 4-INPUT OR/NOR GATE ON Semiconductor
MC100E104 QUINT 2-INPUT AND/NAND GATE ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC100E141 8-BIT SHIFT REGISTER
MC100E143 9-BIT HOLD REGISTER
MC100E101 Quad 4-Input OR/NOR Gate
MC100E104 QUINT 2-INPUT AND/NAND GATE
MC100E107 QUINT 2-INPUT XOR/XNOR GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 9ĆBit Shift Register The MC10E/100E142 is a 9-bit shift register, designed with byte-parity applications in mind. The E142 performs serial/parallel in and serial/parallel out, shifting in one direction. The nine inputs D0 – D8 accept parallel input data, while S-IN accepts serial input data. The Qn outputs do not need to be terminated for the shift operation to function. To minimize noise and power, any Q output not used should be left unterminated. • 700MHz Min. Shift Frequency • 9-Bit for Byte-Parity Applications • Asynchronous Master Reset • Dual Clocks • Extended 100E VEE Range of – 4.2V to – 5.46V • 75kΩ Input Pulldown Resistors The SEL (Select) input pin is used to switch between the two modes of operation — SHIFT and LOAD.
Published: |