900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Motorola Electronic Components Datasheet

MC14060B Datasheet

14-Bit Binary Counter and Oscillator

No Preview Available !

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
14-Bit Binary Counter and
Oscillator
The MC14060B is a 14–stage binary ripple counter with an on–chip
oscillator buffer. The oscillator configuration allows design of either RC or
crystal oscillator circuits. Also included on the chip is a reset function which
places all outputs into the zero state and disables the oscillator. A negative
transition on Clock will advance the counter to the next state. Schmitt trigger
action on the input line permits very slow input rise and fall times.
Applications include time delay circuits, counter controls, and frequency
dividing circuits.
Fully static operation
Diode Protection on All Inputs
Supply Voltage Range = 3.0 V to 18 V
Capable of Driving Two Low–power TTL Loads or One Low–power
Schottky TTL Load Over the Rated Temperature Range
Buffered Outputs Available from Stages 4 Through 10 and
12 Through 14
Common Reset Line
Pin–for–Pin Replacement for CD4060B
TRUTH TABLE
Clock
X
Reset
L
L
H
Output State
No Change
Advance to next state
All Outputs are low
X = Don’t Care
MC14060B
L SUFFIX
CERAMIC
CASE 620
P SUFFIX
PLASTIC
CASE 648
D SUFFIX
SOIC
CASE 751B
ORDERING INFORMATION
MC14XXXBCP
MC14XXXBCL
MC14XXXBD
Plastic
Ceramic
SOIC
TA = – 55° to 125°C for all packages.
PIN ASSIGNMENT
Q12 1
Q13 2
Q14 3
Q6 4
Q5 5
Q7 6
Q4 7
VSS 8
16 VDD
15 Q10
14 Q8
13 Q9
12 RESET
11 CLOCK
10 OUT 1
9 OUT 2
OUT 2
9
OUT 1
10
CLOCK
11
RESET
12
LOGIC DIAGRAM
CQ
Q4 Q5 Q12 Q13 Q14
7 5 1 23
CQ
CQ
CQ
CQ
CQ
C RQ
C RQ
C RQ
C RQ
C RQ
C RQ
Q6 = PIN 4 Q8 = PIN 14 Q10 = PIN 15 VDD = PIN 16
Q7 = PIN 6 Q9 = PIN 13
VSS = PIN 8
REV 3
1/94
©MMOotoTrOolaR, IOncL. A199C5MOS LOGIC DATA
MC14060B
1


Motorola Electronic Components Datasheet

MC14060B Datasheet

14-Bit Binary Counter and Oscillator

No Preview Available !

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMAXIMUM RATINGS* (VoltagesReferencedtoVSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSymbol
Parameter
Value
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVDD
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin, Vout
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎIin, Iout
DC Supply Voltage
Input or Output Voltage (DC or Transient)
Input or Output Current (DC or Transient),
per Pin
– 0.5 to + 18.0
– 0.5 to VDD + 0.5
± 10
V
V
mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPD Power Dissipation, per Package†
500 mW
Tstg Storage Temperature
– 65 to + 150
_C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTL Lead Temperature (8–Second Soldering)
260 _C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ* Maximum Ratings are those values beyond which damage to the device may occur.
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎΆTemperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCeramic “L” Packages – 12 mW/_C From 100_C To 125_C
This device contains protection circuitry to
guard against damage due to high static
voltages or electric fields. However, pre-
cautions must be taken to avoid applications of
any voltage higher than maximum rated volt-
ages to this high–impedance circuit. For proper
v voperation, Vin and Vout should be constrained
to the range VSS (Vin or Vout) VDD.
Unused inputs must always be tied to an
appropriate logic voltage level (e.g., either VSS
or VDD). Unused outputs must be left open.
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎELECTRICAL CHARACTERISTICS (VoltagesReferenced to VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCharacteristic
VDD
Symbol Vdc
– 55_C
Min Max
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin= VDDor0
“0” Level VOL
5.0
0.05
10 — 0.05
15 — 0.05
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin = 0 or VDD
“1” Level VOH
5.0 4.95
10 9.95
15 14.95
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Voltage
“0” Level VIL
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 4.5 or 0.5 V)
5.0 — 1.5
(VO = 9.0 or 1.0 V)
10 — 3.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 13.5 or 1.5 V)
15 — 4.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 0.5 or 4.5 V)
(VO = 1.0 or 9.0 V)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 1.5 or 13.5 V)
“1” Level
VIH
5.0 3.5
10 7.0
15 11.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Voltage
“0” Level VIL
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 4.5 Vdc) (For Input 11
5.0 — 1.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 9.0 Vdc) and Output 10)
10 — 2.0
(VO = 13.5 Vdc)
15 — 2.5
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 0.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 1.0 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 1.5 Vdc)
“1” Level VIH
5.0 4.0
10 8.0
15 12.5
Output Drive Current
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 2.5 V)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 4.6 V)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 9.5 V)
(VOH = 13.5 V)
(Except Source
Pins 9 and 10)
IOH
5.0 – 3.0
5.0 – 0.64
10 – 1.6
15 – 4.2
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.4 V)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.5 V)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 1.5 V)
Sink IOL
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Current
Iin
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Capacitance (Vin = 0)
Cin
Quiescent Current
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Per Package)
IDD
5.0 0.64
10 1.6
15 4.2
15 — ± 0.1
—— —
5.0 — 5.0
10 — 10
15 — 20
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTotal Supply Current**†
(Dynamic plus Quiescent,
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPer Package)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(CL= 50 pF on all outputs,
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎall buffers switching)
IT 5.0
10
15
Min
4.95
9.95
14.95
25_C
Typ #
0
0
0
5.0
10
15
Max
0.05
0.05
0.05
— 2.25
— 4.50
— 6.75
3.5 2.75
7.0 5.50
11.0 8.25
1.5
3.0
4.0
— 2.25
— 4.50
— 6.75
4.0 2.75
8.0 5.50
12.5 8.25
1.0
2.0
2.5
– 2.4
– 0.51
– 1.3
– 3.4
– 4.2
– 0.88
– 2.25
– 8.8
0.51 0.88
1.3 2.25
3.4 8.8
± 0.00001 ± 0.1
— 5.0 7.5
— 0.005 5.0
— 0.010 10
— 0.015 20
IT = (0.25 µA/kHz) f + IDD
IT = (0.54 µA/kHz) f + IDD
IT = (0.85 µA/kHz) f + IDD
125_C
Min Max
— 0.05
— 0.05
— 0.05
4.95
9.95
14.95
— 1.5
— 3.0
— 4.0
3.5 —
7.0 —
11.0 —
— 1.0
— 2.0
— 2.5
4.0 —
8.0 —
12.5 —
– 1.7
– 0.36
– 0.9
– 2.4
0.36
0.9
2.4
± 1.0
150
300
600
Unit
V
V
V
V
Vdc
Vdc
mA
mA
µA
pF
µA
µA
# Data labelled “Typ” is not to be used for design purposes but is intended as an indication of the IC’s potential performance.
** The formulas given are for the typical characteristics only at 25_C.
MC14060B
2
MOTOROLA CMOS LOGIC DATA


Part Number MC14060B
Description 14-Bit Binary Counter and Oscillator
Maker Motorola
PDF Download

MC14060B Datasheet PDF






Similar Datasheet

1 MC14060B 14-Bit Binary Counter and Oscillator
ON Semiconductor
2 MC14060B 14-Bit Binary Counter and Oscillator
Motorola





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy