MC14497
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MC14497/D
PCM Remote Control Transmitter
The MC14497 is a PCM remote control transmitter realized in CMOS technology. Using a dual- single (FSK/AM) frequency bi- phase modulation, the transmitter is designed to work with the MC3373 receiver. Information on the MC3373 can be found in the Motorola Linear and Interface Integrated Circuits book (DL128/D).
There is not a decoder device which is patible with the MC14497. Typically, the decoding resides in MCU software.
- Both FSK/AM Modulation Selectable
- 62 Channels (Up to 62 Keys)
- Reference Oscillator Controlled by Inexpensive Ceramic Resonator:
Maximum Frequency = 500 k Hz
- Very Low Duty Cycle
- Very Low Standby Current: 50 µA Maximum
- Infrared Transmission
- Selectable Start- Bit Polarity (AM Only)
- Shifted Key Mode Available
- Wide Operating Voltage Range: 4 to 10 V
- See Application Notes AN1016 and AN1203
BLOCK DIAGRAM
P SUFFIX PLASTIC DIP
CASE...
