900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Motorola Electronic Components Datasheet

MC14501UB Datasheet

Triple Gate

No Preview Available !

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Triple Gate
Dual 4–Input “NAND” Gate
2–Input “NOR/OR” Gate
8–Input “AND/NAND” Gate
The MC14501UB is constructed with MOS P–channel and N–channel
enhancement mode devices in a single monolithic structure. These
complementary MOS logic gates find primary use where low power
dissipation and/or high noise immunity is desired. Additional characteristics
can be found on the Family Data Sheet.
Diode Protection on All Inputs
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Logic Swing Independent of Fanout
Capable of Driving Two Low–Power TTL Loads or One Low–Power
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSchottky TTL Load Over the Rated Temperature Range
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMAXIMUM RATINGS* (Voltages Referenced to VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSymbol
Parameter
Value
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVDD DC Supply Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin, Vout Input or Output Voltage (DC or Transient)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎIin, Iout Input or Output Current (DC or Transient),
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎper Pin
– 0.5 to + 18.0
– 0.5 to VDD + 0.5
± 10
V
V
mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPD Power Dissipation, per Package†
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTstg Storage Temperature
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTL Lead Temperature(8–SecondSoldering)
500
– 65 to + 150
260
mW
_C
_C
* Maximum Ratings are those values beyond which damage to the device may occur.
†Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
Ceramic “L” Packages: – 12 mW/_C From 100_C To 125_C
CIRCUIT SCHEMATIC
VDD 16
VDD
11
13 (10) 12
(6) 1 14
(7) 2
(9) 3 VSS 15
(5) 4
VSS 8
VSS
Numbers in parenthesis are for second 4–input gate.
MC14501UB
L SUFFIX
CERAMIC
CASE 620
P SUFFIX
PLASTIC
CASE 648
D SUFFIX
SOIC
CASE 751B
ORDERING INFORMATION
MC14XXXBCP
MC14XXXBCL
MC14XXXBD
Plastic
Ceramic
SOIC
TA = – 55° to 125°C for all packages.
LOGIC DIAGRAM
(POSITIVE LOGIC)
1
2
3
4
11
12
5
6
7
9 VDD = PIN 16
VSS = PIN 8
13
14 AND
15 NAND
10
Use Dotted Connection Externally to
Obtain 8–Input AND/NAND
NOTE: Pin 14 must not be used as an input
NOTE: to the inverter.
REV 3
1/94
©MMOotoTrOolaR, IOncL. A199C5MOS LOGIC DATA
MC14501UB
1


Motorola Electronic Components Datasheet

MC14501UB Datasheet

Triple Gate

No Preview Available !

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎELECTRICAL CHARACTERISTICS (VoltagesReferencedtoVSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCharacteristic
VDD
– 55_C
25_C
125_C
Symbol Vdc
Min
Max
Min
Typ #
Max
Min
Max
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin= VDDor0
“0” Level VOL
5.0
0.05
10 — 0.05 —
15 — 0.05 —
0 0.05 — 0.05
0 0.05 — 0.05
0 0.05 — 0.05
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin = 0 or VDD
“1” Level VOH
5.0 4.95 — 4.95
10 9.95 — 9.95
15 14.95 — 14.95
5.0
10
15
— 4.95 —
— 9.95 —
— 14.95 —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Voltage
“0” Level VIL
(VO = 3.6 or 1.4 Vdc)
5.0 — 1.5 —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 7.2 or 2.8 Vdc)
10 — 3.0 —
(VO = 11.5 or 3.5 Vdc)
15 — 3.75 —
2.25 1.5 —
4.50 3.0 —
6.75 3.75 —
1.4
2.9
3.6
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 1.4 or 3.6 Vdc) “1” Level VIH 5.0 3.6 — 3.5 2.75 — 3.5 —
(VO = 2.8 or 7.2 Vdc)
10 7.1 — 7.0 5.50 — 7.0 —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VO = 3.5 or 11.5 Vdc)
15 11.4 — 11.25 8.25 — 11 —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Drive Current
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 2.5 Vdc)
(VOH = 4.6 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 9.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 13.5 Vdc)
Source
NAND*
IOH
5.0 – 1.2
– 1.0
– 1.7
— – 0.7 —
5.0 – 0.25
– 0.2 – 0.36
— – 0.14 —
10 – 0.62 —
– 0.5
– 0.9
— – 0.35 —
15 – 1.8
– 1.5
– 3.5
— – 1.1 —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 2.5 Vdc)
(VOH = 4.6 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 9.5 Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 13.5 Vdc)
NOR
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 2.5 Vdc)
(VOH = 4.6 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOH = 9.5 Vdc)
(VOH = 13.5 Vdc)
NOR–
Inverter
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.4 Vdc)
(VOL = 0.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 1.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.4 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.5 Vdc)
(VOL = 1.5 Vdc)
Sink
NAND*
NOR
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.4 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(VOL = 0.5 Vdc)
(VOL = 1.5 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Current
NOR–
Inverter
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Capacitance
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Vin = 0)
5.0 – 2.1
— – 1.75 – 3.0
5.0 – 0.42 — – 0.35 – 0.63
10 – 1.06 — – 0.88 – 1.58
15 – 3.1 — – 2.63 – 6.12
— – 1.22 —
— – 0.24 —
— – 0.62 —
— – 1.84 —
5.0 – 3.6
5.0 – 0.72
10 – 1.8
15 – 5.4
– 3.0
– 0.6
– 1.5
– 4.5
– 5.1
– 1.08
– 2.7
– 10.5
— – 2.1 —
— – 0.42 —
— – 1.05 —
— – 3.15 —
IOL 5.0 0.64 — 0.51 0.88
10 1.6 — 1.3 2.25
15 4.2 — 3.4
8.8
— 0.36 —
— 0.9 —
— 2.4 —
5.0 0.92 — 0.77 1.32
10 2.34 — 1.95 3.37
15 6.12 — 5.1 13.2
— 0.54 —
— 1.36 —
— 3.57 —
5.0 1.54 — 1.28
2.2
10 3.90 — 3.25 5.63
15 10.2 —
8.5
22
— 0.90 —
— 2.27 —
— 5.95 —
Iin 15 — ± 0.1 — ± 0.00001 ± 0.1 — ± 1.0
Cin — — — —
5.0
7.5 —
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎQuiescent Current
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Per Package)
IDD 5.0
10
15
— 0.25 — 0.0005 0.25 —
0.5
0.0010
0.5
1.0
0.0015
1.0
7.5
15
30
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTotal Supply Current**†
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Dynamic plus Quiescent,
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPer Package)
(CL = 50 pF on all outputs, all
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎbuffers switching)
IT 5.0
10
15
IT = (1.2 µA/kHz) f + IDD
IT = (2.4 µA/kHz) f + IDD
IT = (3.6 µA/kHz) f + IDD
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ#Data labelled “Typ” is not to be used for design purposes but is intended as an indication of the IC’s potential performance.
Unit
Vdc
Vdc
Vdc
Vdc
mAdc
mAdc
mAdc
mAdc
mAdc
mAdc
µAdc
pF
µAdc
µAdc
** The formulas given are for the typical characteristics only at 25_C.
†To calculate total supply current at loads other than 50 pF:
IT(CL) = IT(50 pF) + (CL – 50) Vfk
where: IT is in µA (per package), CL in pF, V = (VDD – VSS) in volts, f in kHz is input frequency, and k = 0.004.
MC14501UB
2
MOTOROLA CMOS LOGIC DATA


Part Number MC14501UB
Description Triple Gate
Maker Motorola
PDF Download

MC14501UB Datasheet PDF





Similar Datasheet

1 MC14501UB Triple Gate
Motorola





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy