Datasheet4U Logo Datasheet4U.com

MC33411B - (MC33411A/B) ANALOG CORDLESS PHONE BASEBAND

Download the MC33411B datasheet PDF. This datasheet also covers the MC33411A variant, as both devices belong to the same (mc33411a/b) analog cordless phone baseband family and are provided as variant models within a single manufacturer datasheet.

Description

section.

2.

Meets Human Body Model (HBM) ≤2000 V and Machine Model (MM) ≤200 V.

Features

  • ol Adj = 0111, fin = 1.0 kHz, unless otherwise noted. ) Characteristics Input Pin Measure Pin Symbol Min Typ Max Unit Tx AUDIO PATH (VCC = 3.6 V, Limiter, Mutes, ALC disabled, TA = 25°C, Gain = 1, Active Mode, fin = 1.0 kHz) Absolute Gain (Vin =.
  • 10 dBV) MCI TX Out G.
  • 4.0 0 Gain Tracking (Referenced to Tx Out for Vin =.
  • 10 dBV) Vin =.
  • 30 dBV Vin =.
  • 40 dBV Total Harmonic Distortion (Vin =.
  • 10 dBV) Maximum Output Voltage (Increase input voltage until.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC33411A_Motorola.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MC33441 Electroluminescent Lamp Driver ON Semiconductor
MC3346 General Purpose Transistor ON Semiconductor
MC33460 Under Voltage Detector Series ON Semiconductor
MC33461 Under Voltage Detector Series ON Semiconductor
MC33465 Micropower Undervoltage Sensing Circuits ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC33411A (MC33411A/B) ANALOG CORDLESS PHONE BASEBAND
MC33410 DUAL CVSD/PLL CORDLESS PHONE SYSTEM
MC3340 ELECTRONIC ATTENUATOR
MC3346 WIDEBAND FSK RECEIVER
MC33463 VARIABLE FREQUENCY MICROPOWER DC-to-DC CONVERTER

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Order this document by MC33411A/D MC33411A/B 900 MHz Analog Cordless Phone Baseband with Compander The MC33411 900 MHz Analog Cordless Phone Baseband system is designed to fit the requirements of a 900 MHz analog cordless telephone system. Included are three PLLs (Phase–Locked Loops). Two are intended for use with external VCOs and 64/65 or 128/129 dual modulus prescalers, and can control the transmit and receive (LO1) frequencies for 900 MHz communication. The third PLL is configured as the 2nd local oscillator (LO2), and is functional to 80 MHz. Also included are muting, audio gain adjust (internal and external), low battery/carrier detect, and a wide range for the PLL reference frequency. The power supply range is 2.7 to 5.5 V.
Published: |