Datasheet4U Logo Datasheet4U.com

MC3363 - LOW POWER DUAL CONVERSION FM RECEIVER

Description

The MC3363 is a complete FM narrowband receiver from RF amplifier to audio preamp output.

The low voltage dual conversion design yields low power drain, excellent sensitivity and good image rejection in narrowband voice and data link applications.

Features

  • cally run at 10.245 MHz under crystal control. The mixers are doubly balanced to reduce spurious responses. The first and second mixers have conversion gains of 18 dB and 21 dB (typical), respectively. Mixer gain is stable with respect to supply voltage. For both conversions, the mixer impedances and pin layout are designed to allow the user to employ low cost, readily available ceramic filters. Following the first.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC3361 LOW POWER NARROW BAND FM IF SUM
MC3361 Low Power Narrow Band FM IF MC Devices
MC3361 Low Power Narrow Band FM IF Samsung Electronics
MC3361 Low Power Narrowband FM IF NXP
MC3361BP LOW VOLTAGE/POWER NARROW BAND FM IF UTC

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC3360P 1/4 Watt Audio Amplifier
MC3361B LOW POWER NARROWBAND FM IF
MC3361C LOW POWER NARROWBAND FM IF
MC3362 LOW-POWER DUAL CONVERSION FM RECEIVER
MC3367 LOW VOLTAGE FM NARROWBAND RECEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Order this document by MC3363/D Low Power Dual Conversion FM Receiver The MC3363 is a single chip narrowband VHF FM radio receiver. It is a dual conversion receiver with RF amplifier transistor, oscillators, mixers, quadrature detector, meter drive/carrier detect and mute circuitry. The MC3363 also has a buffered first local oscillator output for use with frequency synthesizers, and a data slicing comparator for FSK detection. • Wide Input Bandwidth – 200 MHz Using Internal Local Oscillator Wide Input Bandwidth – 450 MHz Using External Local Oscillator • RF Amplifier Transistor MC3363 LOW POWER DUAL CONVERSION FM RECEIVER SEMICONDUCTOR TECHNICAL DATA • • • • • • • • • Muting Operational Amplifier Complete Dual Conversion Low Voltage: VCC = 2.0 V to 6.
Published: |