900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Motorola Electronic Components Datasheet

MC74HC147 Datasheet

Decimal-to-BCD Encoder High-Performance Silicon-Gate CMOS

No Preview Available !

www.DataSheet4U.com
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Decimal-to-BCD Encoder
High–Performance Silicon–Gate CMOS
MC74HC147
The MC74HC147 is identical in pinout to the LS147. The device inputs are
compatible with standard CMOS outputs; with pullup resistors, they are
compatible with LSTTL outputs.
This device encodes nine active–low data inputs to four active–low BCD
Address Outputs, ensuring that only the highest order active data line is
encoded. The implied decimal zero condition is encoded when all nine data
inputs are at a high level (inactive).
Output Drive Capability: 10 LSTTL Loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2 to 6 V
Low Input Current: 1 µA
High Noise Immunity Characteristic of CMOS Devices
In Compliance with the Requirements Defined by JEDEC Standard
No. 7A
Chip Complexity: 136 FETs or 34 Equivalent Gates
16
1
N SUFFIX
PLASTIC PACKAGE
CASE 648–08
16
1
D SUFFIX
SOIC PACKAGE
CASE 751B–05
ORDERING INFORMATION
MC74HCXXXN
MC74HCXXXD
Plastic
SOIC
PIN ASSIGNMENT
LOGIC DIAGRAM
DECIMAL
DATA INPUTS
(ACTIVE–LOW)
D1 11
D2 12
D3 13
D4 1
D5 2
D6 3
D7 4
D8 5
D9 10
9 A0
7 A1
6 A2
14 A3
VCC = PIN 16
GND = PIN 8
NO CONNECTION = PIN 15
BCD
ADDRESS
OUTPUTS
(ACTIVE–LOW)
D4 1
D5 2
16 VCC
15 NC
D6 3
D7 4
D8 5
14 A3
13 D3
12 D2
A2 6
11 D1
A1 7
GND 8
10 D9
9 A0
NC = NO CONNECTION
FUNCTION TABLE
Inputs
Outputs
D9 D8 D7 D6 D5 D4 D3 D2 D1 A3 A2 A1 A0
HHHHHHHHHHHHH
HHHHHHHH L HHH L
HHHHHHHL XHHLH
HHHHHHL XXHHL L
HHHHHL XXXHLHH
HHHHL XXXXHLHL
HHHL XXXXXHL LH
HHL XXXXXXHL L L
HL XXXXXXX LHHH
L XXXXXXXX LHHL
10/95
© Motorola, Inc. 1995
1 REV 6


Motorola Electronic Components Datasheet

MC74HC147 Datasheet

Decimal-to-BCD Encoder High-Performance Silicon-Gate CMOS

No Preview Available !

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC74HC147
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMAXIMUM RATINGS*
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSymbol
Parameter
Value
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVCC
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVout
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎIin
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎIout
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎICC
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPD
DC Supply Voltage (Referenced to GND)
– 0.5 to + 7.0
V
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
DC Input Current, per Pin
– 1.5 to VCC + 1.5
– 0.5 to VCC + 0.5
± 20
V
V
mA
DC Output Current, per Pin
± 25 mA
DC Supply Current, VCC and GND Pins
Power Dissipation in Still Air
Plastic DIP†
SOIC Package†
± 50
750
500
mA
mW
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTstg Storage Temperature
– 65 to + 150
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTL Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
260
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ*Maximum Ratings are those values beyond which damage to the device may occur.
_C
_C
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this high–impedance cir-
cuit. For proper operation, Vin and
v vVout should be constrained to the
range GND (Vin or Vout) VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
Functional operation should be restricted to the Recommended Operating Conditions.
†Derating — Plastic DIP: – 10 mW/_ C from 65_ to 125_ C
SOIC Package: – 7 mW/_ C from 65_ to 125_ C
For high frequency or heavy load considerations, see Chapter 2 of the Motorola High–Speed CMOS Data Book (DL129/D).
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎRECOMMENDED OPERATING CONDITIONS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSymbol
Parameter
Min Max Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVCC DC Supply Voltage (Referenced to GND)
2.0 6.0 V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin, Vout DC Input Voltage, Output Voltage (Referenced to GND) 0 VCC V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTA Operating Temperature, All Package Types
– 55 + 125 _ C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtr, tf Input Rise and Fall Time
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Figure 1)
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
0
0
0
1000
500
400
ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎDC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎGuaranteed Limit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSymbol
Parameter
Test Conditions
VCC
V
– 55 to
25_ C
v 85_C v 125_C
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVIH Minimum High–Level Input
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVoltage
vVout = 0.1 V or VCC – 0.1 V
|Iout| 20 µA
2.0 1.5 1.5 1.5
4.5 3.15 3.15 3.15
6.0 4.2 4.2 4.2
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVIL Maximum Low–Level Input
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVoltage
vVout = 0.1 V or VCC – 0.1 V
|Iout| 20 µA
2.0 0.3 0.3 0.3 V
4.5 0.9 0.9 0.9
6.0 1.2 1.2 1.2
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVOH
Minimum High–Level Output
Voltage
vVin = VIH or VIL
|Iout| 20 µA
vVin = VIH or VIL |Iout| 4.0 mA
v|Iout| 5.2 mA
2.0
4.5
6.0
4.5
6.0
1.9
4.4
5.9
3.98
5.48
1.9 1.9
4.4 4.4
5.9 5.9
3.84 3.70
5.34 5.20
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVOL
Maximum Low–Level Output
Voltage
vVin = VIH
|Iout| 20 µA
vVin = VIH or VIL |Iout| 4.0 mA
v|Iout| 5.2 mA
2.0
4.5
6.0
4.5
6.0
0.1
0.1
0.1
0.26
0.26
0.1 0.1
0.1 0.1
0.1 0.1
0.33 0.40
0.33 0.40
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎIin Maximum Input Leakage Current Vin = VCC or GND
6.0 ± 0.1 ± 1.0 ± 1.0 µA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎICC MaximumQuiescent Supply
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCurrent (per Package)
Vin = VCC or GND
Iout = 0 µA
6.0 8
80 160 µA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎNOTE: Information on typical parametric values can be found in Chapter 2 of the Motorola High–Speed CMOS Data Book (DL129/D).
MOTOROLA
2 High–Speed CMOS Logic Data
DL129 — Rev 6


Part Number MC74HC147
Description Decimal-to-BCD Encoder High-Performance Silicon-Gate CMOS
Maker Motorola
PDF Download

MC74HC147 Datasheet PDF





Similar Datasheet

1 MC74HC14 Hex Schmitt-Trigger Inverter
Motorola
2 MC74HC147 Decimal-to-BCD Encoder High-Performance Silicon-Gate CMOS
Motorola
3 MC74HC14A HEX Schmitt-Trigger Inverter High-Performance Silicon-Gate CMOS
Motorola
4 MC74HC14A Hex Schmitt-Trigger Inverter
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy