Datasheet4U Logo Datasheet4U.com

MC74HC4040A - 12-Stage Binary Ripple Counter

Description

INPUTS Clock (Pin 10) Negative

edge triggering clock input.

to

low transition on this input advances the state of the counter.

high reset.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC74HC4040A 12-Stage Binary Ripple Counter ON Semiconductor
MC74HC4040N CMOS 12-State Ripple Carry Binary Counter / Driver ETC
MC74HC4046A Phase-Locked Loop ON Semiconductor
MC74HC4016 Quad Analog Switch / Multiplexer / Demultiplexer ON Semiconductor
MC74HC4020A 14-Stage Binary Ripple Counter ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC74HC4049 Hex Buffers/Logic-Level Down Converters
MC74HC4002 Dual 4-Input NOR Gate
MC74HC4016A Quad Analog Switch/ Multiplexer/Demultiplexer
MC74HC4017 DECADE COUNTER
MC74HC4050 Hex Buffers/Logic-Level Down Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 12-Stage Binary Ripple Counter High–Performance Silicon–Gate CMOS The MC54/74C4040A is identical in pinout to the standard CMOS MC14040. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device consists of 12 master–slave flip–flops. The output of each flip–flop feeds the next and the frequency at each output is half of that of the preceding one. The state counter advances on the negative–going edge of the Clock input. Reset is asynchronous and active–high. State changes of the Q outputs do not occur simultaneously because of internal ripple delays.
Published: |