Download the 56F8025 datasheet PDF.
This datasheet also covers the 56F8035 variant, as both devices belong to the same 16-bit digital signal controllers family and are provided as variant models within a single manufacturer datasheet.
General Description
of the TMS signal in Table 2-3: Note: Always tie the TMS pin to VDD through a 2.2K resistor.
Changed the VBA register reset value and updated the footnote in Section 5.6.8.
Changed the STANDBY > STOP IDD values in Table 10-6 as follows: Typical: was 290μA, is 540μA Maximum: was 3
Note: The manufacturer provides a single datasheet file (56F8035_MotorolaSemiconductor.pdf) that lists specifications for multiple related part numbers.
Full PDF Text Transcription for 56F8025 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
56F8025. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet4U.com 56F8035/56F8025 Data Sheet Technical Data 56F8000 16-bit Digital Signal Controllers MC56F8025 Rev. 6 02/2010 freescale.com www.DataSheet4U.com Documen...
View more extracted text
ers MC56F8025 Rev. 6 02/2010 freescale.com www.DataSheet4U.com Document Revision History Version History Rev. 0 Rev. 1 Initial public release. • In Table 5-3, changed the ITCN_BASE address from $00 F060 (incorrect value) to $00 F0E0 (the correct value). • In Table 10-4, added an entry for flash data retention with less than 100 program/erase cycles (minimum 20 years). • In Table 10-6, changed the device clock speed in STOP mode from 8MHz to 4MHz. • In Table 10-12, changed the typical relaxation oscillator output frequency in Standby mode from 400kHz to 200kHz.
56F8025 Datasheet
