!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.
Explanation of Symbols in This Catalog
Ultra- L x W dimension: products of 0.6 x 0.3 mm or less
AEC- AEC-Q200 compliant product
Product suitable for acoustic noise reduction and low distortion
This product suppresses acoustic noise,
which occurs when a ceramic capacitor is used,
by devising the materials and configuration.
Fail Fail safe product
safe This capacitor is designed to prevent failures
as much as possible by short mode.
Deflecting Product resistant to deflection cracking
crack This capacitor is designed to prevent failures as much
as possible by short mode caused by cracking
when there is board deflection.
Soldering Product with solder cracking suppression
crack This capacitor is configured with metal terminals or lead
wires connected to the chip.
The metal terminals or lead wires relieve the stress from
expansion and contraction of the solder, to suppress solder
Also, including capacitor which can be mounted with a
conductive adhesive, instead of soldering.
s All the products in this catalog comply with EU RoHS.
s EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
s For more details, please refer to our website 'Murata's Approach for EU RoHS'
Free Datasheet http://www.datasheet-pdf.com/