OKI-T-3-W40N-C Datasheet | Murata

.murata-ps. OKI-T/3-W40 Series Adjustable Output 3-Amp DOSA-SMT DC/DC Converters Typical unit Features - Non-isolated SMT POL DC/DC power module - 16-40Vdc input voltage range - Programmable output voltage from 0.7525-5.5Vdc - 3 Amp output current models - Drives 1000 μF ceramic capacitive loads - High power conversion efficiency 86% at 5 Vout - Outstanding thermal derating performance - Over temperature and over current protection - On/Off control - UL/EN/IEC 60950-1 safety, 2nd Edition - Industry-standard (DOSA) surface-mount package - Ro HS-6 hazardous substance pliance PRODUCT OVERVIEW The OKI-T/3 series are non-isolated Point-of Load (POL) DC/DC power converters for embedded applications. The module is fully patible with Distributed-power Open Standards Alliance (DOSA) industry-standard specifications (.dosapower. ). Applications include powering CPU’s, industrial 24V transducers and POS terminals. The wide input range is 16 to 40 Volts DC. The maximum output current is 3 Amps. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient Point of Load (POL) module Features programmable output voltage and On/Off control. These converters also include under voltage lock out (UVLO), output short circuit protection, overcurrent and over temperature protections. These units are designed to meet all standard UL/EN/IEC 60950-1 safety certifications (2nd Edition) and Ro HS-6 hazardous substance pliance. Connection Diagram +Vin F1 On/Off Control External DC Power Source Open = On Closed = Off (Positive On/Off) Controller t4XJUDIJOH t'JMUFST t$VSSFOU4FOTF Reference and Error Amplifier mon Figure 1. OKI-T/3 Note: Murata Power Solutions strongly remends an external input fuse, F1. See...