OKL-T-3-W12N-C-S
OKL-T-3-W12N-C-S is Programmable Output 3-Amp iLGA SMT PoLs manufactured by Murata.
- Part of the OKL-T-3-W12P-C comparator family.
- Part of the OKL-T-3-W12P-C comparator family.
.murata-ps.
OKL-T/3-W12 Series
Programmable Output 3-Amp i LGA SMT Po Ls
Typical unit
Features
- i LGA inspectable Land Grid Array
- 4.5-14Vdc input voltage range
- Programmable output voltage from 0.591-5.5Vdc
- Drives up to 200 μF ceramic capacitive loads
- High power conversion efficiency at 93%
- Outstanding thermal derating performance
- Short circuit and over current protection
- On/Off control and Power Good signal
- Optional Sequence/Tracking operation
(OKL2-T/3-W12 models)
- Certified to UL/EN/IEC 60950-1 safety, 2nd Edition
- Ro HS-6 hazardous substance pliance
PRODUCT OVERVIEW
The OKL-T/3-W12 series are miniature non-isolated Point-of-Load (Po L) DC/DC power converters for embedded applications. Featuring inspectable Land Grid Array (i LGA) format, the OKL-T/3-W12 measures only 0.48 x 0.48 x 0.244 inches max. (12.2 x 12.2 x 6.2 mm max.).
The wide input range is 4.5 to 14 Volts DC. The maximum output current is 3 Amps. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient Point of Load (Po L) module Features programmable output voltage and On/Off control. These converters also include under voltage lock out (UVLO), output short circuit protection, and over-current protections.
An optional sequence/tracking feature on OKL2-T/3-W12 models allows power sequencing of Po L’s. These units are certified to all standard UL/EN/ IEC 60950-1 safety certifications (2nd Edition) and Ro HS-6 hazardous substance pliance.
Connection Diagram +Vin
F1 On/Off Control
External DC Power Source
Open = On Closed = Off
(Positive On/Off)
Controller t4XJUDIJOH t'JMUFST t$VSSFOU4FOTF
Reference and Error Amplifier mon
Sequence/Tracking (OKL2 Models)
Power...
