OKX-T-10-D12N-C Datasheet | Murata

.murata-ps. OKX T/10 & T/16-D12 Series Adjustable DOSA 10/16-Amp SIP DC/DC Converters Features - Non-isolated SIP POL DC/DC power module - 8.3-14Vdc input voltage range - Programmable output voltage from 0.7525-5.5Vdc - 10 Amp (T/10) or 16 Amp (T/16) output current models - Drives 1000 μF ceramic capacitive loads - High power conversion efficiency 94.5% at 3.3 Vout - Outstanding thermal derating performance - Over temperature and over current protection - On/Off control, Sense and optional Sequence/ Tracking input - UL/EN/IEC 60950-1 safety - Industry-standard (DOSA) SIP format - Ro HS-6 hazardous substance pliance Typical unit PRODUCT OVERVIEW The OKX-T/10 and -T/16 series are miniature SIP non-isolated Point-of-Load (POL) DC/DC power converters for embedded applications. The module is fully patible with Distributed-power Open Standards Alliance (DOSA) industry-standard specifications (.dosapower.). Applications include powering CPU’s, data/tele systems, programmable logic and mixed voltage systems. The wide input range is 8.3 to 14 Volts DC. Two maximum output currents are offered, 10 Amps (T/10 models) or 16 Amps (T/16 models). Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient Point of Load (POL) module Features programmable output voltage and On/Off control. An optional Sequence/Tracking input allows controlled ramp-up and ramp-down outputs. The Sense input provides load pensation. These converters also include under voltage lock out (UVLO), output short circuit protection, over-current and over temperature protections. These units are designed to meet all standard UL/EN/IEC 60950-1 safety and FCC EMI/RFI emissions certifications and Ro HS-6 hazardous substance pliance. +Vin F1 On/Off Control External DC Power Source Open = On Closed = Off (Positive On/Off) mon Connection Diagram Controller t4XJUDIJOH t'JMUFST...