OKY2-T-10-D12N-C Datasheet | Murata

.murata-ps. OKY-T/10 & T/16-D12 Series Programmable DOSA-SMT 10/16-Amp DC/DC Converters Typical unit Features - Wide 8.3-14 VDC input range - Non-isolated output adjustable from 0.7525 to 5.5 Volts up to 16 Amps - DOSA-patible SMT package - Optional sequence/tracking operation - Outstanding thermal performance and derating - Short circuit protection - On/Off control - High efficiency up to 94.5% - Over temperature protection - Meets UL/EN/IEC 60950-1 safety approvals. PRODUCT OVERVIEW The OKY-T/10 and -T/16 series are miniature SMT non-isolated Point-of-Load (POL) DC/DC power converters for embedded applications. The module is fully patible with Distributed-power Open Standards Alliance (DOSA) industry-standard specifications (.dosapower.). Applications include powering CPU’s, data/tele systems, programmable logic and mixed voltage systems. The wide input range is 8.3 to 14 Volts DC. Two maximum output currents are offered, 10 Amps (T/10 models) or 16 Amps (T/16 models). Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient Point of Load (POL) module Features programmable output voltage and On/Off control. An optional Sequence/Tracking input allows controlled ramp-up and ramp-down outputs. The Sense input provides remote sense. These converters also include under voltage lock out (UVLO), output short circuit protection, over-current and over temperature protections. These units are designed to meet all standard UL/EN/IEC 60950-1 safety and FCC EMI/RFI emissions certifications and Ro HS-6 hazardous substance pliance. Contents Description, Connection Diagram, Photograph Ordering Guide, Model Numbering Mechanical Specifications, Input/Output Pinout Detailed Electrical Specifications Output Voltage Adjustment, Soldering Guidelines Application Notes Performance Data - OKY2-T/10-D12 Performance Data and Oscillograms - OKY2-T/16-D12 Tape and Reel Information Product Label, MTBF Table Page 1 2...