Datasheet4U Logo Datasheet4U.com

MTL003 - SXGA Flat Panel Controller

Description

The MTL003 Flat Panel Display (FPD) Controller is an input format converter for TFT-LCD Monitor or LCD TV application which accepts 15-pin D-sub RGB graphic signals (through ADC), YUV signals from digital video decoder or digital RGB graphic signals from PanelLink TMDS receiver.

Features

  • General.
  • Auto configuration of sampling clock frequency, phase, H/V center, as well as white balance. Auto detection of present or non-present or over range sync signals and their polarities. Composite sync separation and odd/even field detection of interlaced video. On-chip output PLL provide clock frequency fine-tune (inverse, duty cycle and delay). Selection of serial 2-wire I2C or 8-bit direct host interface to 8-bit MCU. 3.3V suppl.

📥 Download Datasheet

Datasheet Details

Part number MTL003
Manufacturer Myson
File Size 472.75 KB
Description SXGA Flat Panel Controller
Datasheet download datasheet MTL003 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MYSON TECHNOLOGY MTL003 (Rev. 0.95) SXGA Flat Panel Controller FEATURES General • • • • • • Auto configuration of sampling clock frequency, phase, H/V center, as well as white balance. Auto detection of present or non-present or over range sync signals and their polarities. Composite sync separation and odd/even field detection of interlaced video. On-chip output PLL provide clock frequency fine-tune (inverse, duty cycle and delay). Selection of serial 2-wire I2C or 8-bit direct host interface to 8-bit MCU. 3.3V supplier, 5V I/O tolerance in 256-pin PQFP or 272-pin BGA package. Single RGB (24-bit) or Dual RGB (48-bit) input rates up to 160MHz. Support both non-interlaced and interlaced RGB graphic input signals.
Published: |