Datasheet4U Logo Datasheet4U.com

MTL004 - XGA Flat Panel Controller

Description

The MTL004 Flat Panel Display (FPD) Controller is an input format converter for TFT-LCD Monitor or LCD TV application which accepts 15-pin D-sub RGB graphic signals (through ADC), or digital RGB graphic signals from PanelLink TMDS receiver.

Features

  • General.
  • Auto configuration of sampling clock frequency, phase, H/V center, as well as white balance. Auto detection of present or non-present or over range sync signals and their polarities. Composite sync separation and odd/even field detection of interlaced video. No external memory required. On-chip output PLL provide clock frequency fine-tune (inverse, duty cycle and delay). Selection of serial 2-wire I2C or 3-wire serial.

📥 Download Datasheet

Datasheet Details

Part number MTL004
Manufacturer Myson
File Size 457.92 KB
Description XGA Flat Panel Controller
Datasheet download datasheet MTL004 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MYSON TECHNOLOGY MTL004 (Rev. 0.95) XGA Flat Panel Controller FEATURES General • • • • • • • Auto configuration of sampling clock frequency, phase, H/V center, as well as white balance. Auto detection of present or non-present or over range sync signals and their polarities. Composite sync separation and odd/even field detection of interlaced video. No external memory required. On-chip output PLL provide clock frequency fine-tune (inverse, duty cycle and delay). Selection of serial 2-wire I2C or 3-wire serial or 8-bit direct host interface to 8-bit MCU. 3.3V supplier, 5V I/O tolerance in 208-pin PQFP package. Single RGB (24-bit) or Dual RGB (48-bit) input rates up to 100MHz. Support both non-interlaced and interlaced RGB graphic input signals..
Published: |