900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  NEC Electronic Components Datasheet  

AC03FGM Datasheet

(AC03DGM/FGM) 3A MOLD Triac

No Preview Available !

DATA SHEET
THYRISTORS
AC03DGM, AC03FGM
3 A MOLD TRIAC
The AC03EGM and AC03FGM are fully diffused mold TRIACs
with an effective on-current of 3 A. The repeat peak off-voltages
are 400 V and 600 V.
PACKAGE DRAWING (UNIT: mm)
FEATURES
• Gate trigger current (mode I, III, and IV) at 12 mA or less is
guaranteed.
• This transistor features a small and lightweight package and is
easy to handle even on the mounting surface due to its TO-
202AA dimensions. Processing of lead wires and heatsink
(tablet) using jigs is also possible.
• High degrees-of-freedom applications design is available due to
high gate trigger sensitivity and small hold current distribution.
• Employs flame-retardant epoxy resin (UL94V-0).
APPLICATIONS
Noncontact switches of motor
temperature control, lamp light control
speed
control,
heater
*TC test bench-mark
Standard weight: 1.4 g
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Non-repetitive peak off-state voltage
Repetitive peak off-voltage
Effective on-state current
Symbol
VDSM
VDRM
IT(RMS)
Surge on-state current
ITSM
Fusing current
Critical rate of rise of on-state
current
Peak gate power dissipation
Average gate power dissipation
Peak gate current
Junction temperature
Storage temperature
ƒiT2dt
dIT/dt
PGM
PG(AV)
IGM
Tj
Tstg
AC03DGM
AC03FGM
500 700
400 600
3 (TC = 92°C)
30 (50 Hz 1 cycle)
33 (60 Hz 1 cycle)
4.0 (1 ms t 10 ms)
40
3 (f 50 Hz, Duty 10 %)
0.3
±0.5 (f 50 Hz, Duty 10 %)
40 to +125
55 to +150
Unit Remarks
V
V
A Refer to Figures
11 and 12.
A Refer to Figure 2.
A2S
A/µs
W
W
A
°C
°C
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D13536EJ3V0DS00 (3rd edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928


  NEC Electronic Components Datasheet  

AC03FGM Datasheet

(AC03DGM/FGM) 3A MOLD Triac

No Preview Available !

AC03DGM, AC03FGM
ELECTRICAL CHARACTERISTICS (Tj = 25°C, RGK = 1 k)
Parameter
Symbol
Conditions
MIN. TYP. MAX. Unit Remarks
Repeat peak off-current
IDRM
VDM = VDRM
Tj = 25°C
Tj = 125°C
− − 100 µA
− − 1 mA
On-state voltage
VTM ITM = 5 A
1.8
Refer to
V
Figure 1.
Gate trigger
current
Mode I
II
III
VDM = 12 V
IGT
RL = 30
T2 +, G+
T2 , G+
T2 , G
− − 12
−−−
Refer to
− − 12 mA Figure 4.
IV
T2 +, G
− − 12
Gate trigger
voltage
Mode I
II
III
VDM = 12 V
VGT
RL = 30
T2 +, G+
T2 , G+
T2 , G
− − 1.5
−−−
Refer to
V
− − 1.5
Figure 4.
IV
Gate non-trigger voltage
T2 +, G
1
VGD Tj = 125°C, VDM = 2 VDRM
− − 1.5
0.2
V
Hold current
Critical rate of rise of off-
state voltage
IH
dv/dt
VDM = 24 V, ITM = 5 A
2
Tj = 125°C, VDM = 3 VDRM
10 mA
100 V/µs
Commutating critical rate of
rise of off-state voltage
Thermal resistance*
(dv/dt)c
Rth(jc)
Rth(ja)
Tj = 125°C
(diT/dt)c = 1.6 A/ms
VD = 400 V
Junction-to-case AC
Junction-to-ambient AC
5
V/µs
− − 10 °C/W Refer to
− − 75 °C/W Figure 13.
* The thermal resistance at 50 Hz and 60 Hz sine wave current, which is shown on the following expression:
Tj(max)–TC
R =th(jc) PT(AV)
Tj(max) :Maximum junction temperature
TC :Case temperature
PT(AV) :Average on-dissipation
2 Data Sheet D13536EJ3V0DS


Part Number AC03FGM
Description (AC03DGM/FGM) 3A MOLD Triac
Maker NEC
Total Page 6 Pages
PDF Download

AC03FGM Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 AC03FGM (AC03DGM/FGM) 3A MOLD Triac
NEC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy