MOS INTEGRATED CIRCUIT
(10680 + 10680) PIXELS × 3 COLOR CCD LINEAR IMAGE SENSOR
The μ PD8882 is a color CCD (Charge Coupled Device) linear image sensor which changes optical images to
electrical signal and has the function of color separation.
The μ PD8882 has 3 rows of (10680 + 10680) staggered pixels, and each row has a dual-sided readout-type charge
transfer register. And it has reset feed-through level clamp circuits and voltage amplifiers. Therefore, it is suitable for
2400 dpi/A4 color image scanners.
• Valid photocell : (10680 + 10680) staggered pixels × 3
• Photocell’s size : 2.7 μ m × 5.4 μ m
• Line spacing
• Color filter
: 86.4 μ m (16 lines) Red line - Green line, Green line - Blue line
43.2 μ m (8 lines) Odd line - Even line (for each color)
: Primary colors (red, green and blue), pigment filter (with light resistance 107 lx•hour)
: 96 dot/mm A4 (210 × 297 mm) size (shorter side)
2400 dpi US letter (8.5” × 11”) size (shorter side)
• Drive clock level : CMOS output under 5 V operation
• Data rate
: Built-in amplifiers : 10.0 MHz Max. CCD transfer : 4.5 MHz Max./each CCD
• Power supply : +12 V
• On-chip circuits : Reset feed-through level clamp circuits
CCD linear image sensor 22-pin plastic DIP (10.16 mm (400))
Remark The μ PD8882CY-A is a lead-free product.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S17085EJ2V0DS00 (2nd edition)
Date Published May 2005 NS CP (K)
Printed in Japan
The mark shows major revised points.