MOS INTEGRATED CIRCUIT
(10680 PIXELS × 4 LINES) × 3 COLOR CCD LINEAR IMAGE SENSOR
The μ PD8884A is a color CCD (Charge Coupled Device) linear image sensor which changes optical images to
electrical signal and has the function of color separation.
The μ PD8884A has 3 rows of (10680 × 4) staggered pixels, and each row has a dual-sided readout-type charge
transfer register. And it has reset feed-through level clamp circuits and voltage amplifiers. Therefore, it is suitable for
4800 dpi/A4 color image scanners.
• Valid photocell : (10680 pixels × 4) × 3
• Photocell’s size : 4 μ m
• Line spacing : Quad staggered pixels
• Color filter
96 μ m (24 lines) Red line - Green line, Green line - Blue line
: Primary colors (red, green and blue), pigment filter (with light resistance 107 lx•hour)
: 192 dot/mm A4 (210 × 297 mm) size (shorter side)
4800 dpi US letter (8.5” × 11”) size (shorter side)
• Drive clock level : CMOS output under 5 V operation
• Data rate
: 5.0 MHz Max.
• Power supply : +12 V
• On-chip circuits : Reset feed-through level clamp circuits
CCD linear image sensor 32-pin plastic DIP (10.16 mm (400))
Remark The μ PD8884ACY-A is a lead-free product.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S17546EJ1V0DS00 (1st edition)
Date Published May 2005 NS CP (K)
Printed in Japan