UPG2110TB Datasheet | NEC

DESCRIPTION The µPG2106TB and µPG2110TB are Ga As MMIC for PA driver amplifier with variable gain function which were developed for PDC (Personal Digital Cellular in Japan) and another L-band application. The device can operate with 3.0 V, having the high gain and low distortion. The µPG2106TB is for 800 MHz band application, and the µPG2110TB is for 1.5 GHz band application. FEATURES - - - - - - : VDD1 = VDD2 = 3.0 V : 889 to 960 MHz, 1429 to 1453 MHz@Pout = +8 d Bm : Padj1 = - 60 d Bc TYP. @VDD = 3.0 V, Pout = +8 d Bm, VAGC = 2.5 V External input and output matching Low operation current : IDD = 25 m A TYP. @VDD = 3.0 V, Pout = +8 d Bm, VAGC = 2.5 V External input and output matching Variable gain control function : ∆G = 40 d B TYP. @VAGC = 0.5 to 2.5 V External input and output matching 6-pin super minimold package Low operation voltage f RF Low distortion APPLICATION - Digital Cellular : PDC, IS-136 etc. ORDERING INFORMATION (PLAN) Part Number Package 6-pin super minimold Supplying Form Carrier tape width is 8 mm. Qty 3 kp/reel. µPG2106TB-E3 µPG2110TB-E3 Remark To order evaluation samples, please contact your local NEC sales office. (Part number for sample order: µPG2106TB, µPG2110TB) ABSOLUTE MAXIMUM RATINGS (TA = +25 °C) Parameter Supply Voltage AGC Control Voltage Input Power Total Power Dissipation Operating Ambient Temperature Storage Temperature Symbol VDD1, VDD2 VAGC Pin Ptot TA Tstg Ratings 6.0 6.0 - 8 140 Note Unit V V d Bm m W °C °C - 30 to +90 - 35 to +150 Note Mounted on a 50 × 50 × 1.6 mm double copper clad epoxy glass PWB, TA = +85 °C Caution The IC must be handled with care to prevent static discharge because its circuit posed of Ga As HJ-FET. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P14318EJ1V0DS00...