BIPOLAR ANALOG INTEGRATED CIRCUITS
5 V, SUPER MINIMOLD SILICON MMIC
MEDIUM OUTPUT POWER AMPLIFIER
The µPC2709TB is a silicon monolithic integrated circuits designed as 1st IF amplifier for DBS tuners. This IC is
packaged in super minimold package which is smaller than conventional minimold.
The µPC2709TB has compatible pin connections and performance to µPC2709T of conventional minimold
version. So, in the case of reducing your system size, µPC2709TB is suitable to replace from µPC2709T.
These IC is manufactured using NEC’s 20 GHz fT NESAT™III silicon bipolar process. This process uses silicon
nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and
prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.
• High-density surface mounting : 6-pin super minimold package (2.0 × 1.25 × 0.9 mm)
• Wideband response
: fu = 2.3 GHz TYP. @3 dB bandwidth
• Medium output power
: PO (sat) = +11.5 dBm@f = 1 GHz with external inductor
• Supply voltage
: VCC = 4.5 to 5.5 V
• Power gain
: GP = 23 dB TYP. @f = 1 GHz
• Port impedance
: input/output 50 Ω
• 1st IF amplifiers in DBS converters
• RF stage buffer in DBS tuners, etc.
6-pin super minimold
Embossed tape 8 mm wide.
1, 2, 3 pins face the perforation side of the tape.
Qty 3 kpcs/reel.
Remark To order evaluation samples, please contact your local NEC sales office (Part number for sample order:
Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P12653EJ3V0DS00 (3rd edition)
Date Published November 2000 N CP(K)
Printed in Japan
The mark shows major revised points.