Datasheet4U Logo Datasheet4U.com

HS-A1370 - (HS-A1370 / HS-A1380) CMOS Compatible Enable/Disable

Description

The HS-A1370 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems.

Supplying Pin 1 of the HS-A1370 units with a logic “0" enables the output on Pin 8.

Features

  • Wide frequency range.
  • 0.5MHz to 20.0MHz.
  • User specified tolerance available.
  • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum.
  • Space-saving alternative to discrete component oscillators.
  • High shock resistance, to 3000g.
  • All metal, resistance weld, hermetically sealed package.
  • 3.3 Volt operation Electrical Connection Pin 1 7 8 14 Connection Enable Input Grd & Case Output VDD.
  • Low Jitter.

📥 Download Datasheet

Datasheet Details

Part number HS-A1370
Manufacturer NEL
File Size 283.84 KB
Description (HS-A1370 / HS-A1380) CMOS Compatible Enable/Disable
Datasheet download datasheet HS-A1370 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS-0508RH Radiation Hardened Single 8/Differential 4-Channel CMOS Analog Multiplexers Intersil Corporation
HS-0509RH Radiation Hardened Single 8/Differential 4-Channel CMOS Analog Multiplexers Intersil Corporation
HS-0546RH Radiation Hardened Single 16/Differential 8 Channel CMOS Analog Multiplexers with Active Overvoltage Protection Intersil Corporation
HS-0547RH Radiation Hardened Single 16/Differential 8 Channel CMOS Analog Multiplexers with Active Overvoltage Protection Intersil Corporation
HS-0548RH Radiation Hardened Single 8/Differential 4 Channel CMOS Analog Multiplexers Intersil Corporation

Other Datasheets by NEL

Part Number Description
HS-A1380 (HS-A1370 / HS-A1380) CMOS Compatible Enable/Disable
HS-A1200 (HS-A1200 / HS-A1200) CRYSTAL CLOCK OSCILLATORS
HS-A1210 (HS-A1200 / HS-A1200) CRYSTAL CLOCK OSCILLATORS
HS-A1420 CMOS
HS-A1440 CRYSTAL CLOCK OSCILLATORS

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com CRYSTAL CLOCK OSCILLATORS CMOS Compatible Enable/Disable Data Sheet 9617H Rev. N HS-A1370/A1380 Series Description The HS-A1370 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying Pin 1 of the HS-A1370 units with a logic “0" enables the output on Pin 8. Alternately, supplying pin 1 of the HS-A1380 units with a logic “1" enables its Pin 8 output. In the disabled mode, Pin 8 presents a high impedance to the load. All units are resistance welded in an all metal package, offering RFI shielding, and are designed to survive standard wave soldering operations without damage. Insulated standoffs to enhance board cleaning are standard. Features • Wide frequency range– 0.5MHz to 20.
Published: |