NJM2504 Datasheet | New Japan Radio

DESCRIPTION The NJM2504 is video differential output driver. The single-end signal .. is converted to the differential signal. The single-end signal can be transmitted by the differential signal by the connection with NJM2507. And, it is converted to the single-end signal by the NJM2507. The mon mode noise can be removed because of the differential motion transmission, and it is the best for the transmission of car AV system. QPACKAGE OUTLINE NJM2504RB1 QFEATURES O Operating Voltage 4.5 to 9.5V O Input: Single-end signal, Output: Differential signal O Internal 6d B Amplifier O Internal 75ohm Driver O Internal SAG Correction Circuit O Bipolar Technology O Package Outline TVSP8 QPIN CONNECTION 1: V+ 2: Power Save 3: VIN 4: GND 5: Vsagn 6: Voutn 7: Vsagp 8: Voutp 1 2 3 4 8 7 6 5 QBLOCK DIAGRAM Vcc Power Save VOUTP VSAGP VIN Bias VSAGN VOUTN Ver.6 -1- QABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATINGS UNIT + Supply Voltage V 10 V Power Dissipation PD 580(Note1) m W Operating Temperature Range Topr -40 to +85(Note2) °C .. Storage Temperature Range Tstg -40 to +150 °C (Note 1) At on a board of EIA/JEDEC specification. (114.3 x 76.2 x 1.6mm 2 layers, FR-4) (Note 2) It has high operating temperature range product. (-40 to +105°C) QRECENDED OPERATING CONDITIONS (Ta=25°C) PARAMETER Operating voltage SYMBOL Vopr TEST CONDITION MIN. 4.5 TYP. MAX. 9.0 UNIT V QELECTRICAL CHRACTERISTCS (V+ =5V, RL=150ohm,Ta=25°C) PARAMETER Supply Current Supply Current at Power Save Mode Maximum Output Level Voltage Gain Frequency Characteristics Differential Gain Differential Phase SW Voltage High Level SW Voltage Low Level SW Sink Current High Level SW Sink Current Low Level QCONTROL CHRACTERISTC PARAMETER Power Save SYMBOL ICC Isave Vom Gv Gf DG DP Vth H Vth L Ith H Ith L No signal Power save mode Vin=100k Hz,sin-signal, THD=1%, Vin=1MHz, 1.0Vp-p sin-signal Vin=10MHz/1MHz, 1.0Vpp sin-signal Vin=1.0Vp-p 10step video signal Vin=1.0Vp-p 10step video signal TEST...