NTE1507 - Integrated Circuit 10-Step Adjustable Analog Level Detector
NTE Electronics (defunct)
General Description
The NTE1507 is an integrated circuit in a 16
Lead DIP type package consisting of ten comparators and a reference voltage network to detect the level of a signal at the analog input.
Key Features
D 10 Comparators to Digitize Analog Input Signals D Cascade Feature Allows Stacking Output Display Strings D Threshold Intervals Adjustable from 200mV to 100mV D Open.
Emitter Outputs Capable of Sourcing up to 25mA and Withstanding up to 35V D Supply Voltage Range of 10V to 35V (VCC2) Absolute Maximum Ratings: (TA = 0° to +70°C unless otherwise specified) Supply Voltage VCC1 (Note 1).
Full PDF Text Transcription for NTE1507 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
NTE1507. For precise diagrams, and layout, please refer to the original PDF.
NTE1507 Integrated Circuit 10–Step Adjustable Analog Level Detector Description: The NTE1507 is an integrated circuit in a 16–Lead DIP type package consisting of ten comp...
View more extracted text
ntegrated circuit in a 16–Lead DIP type package consisting of ten comparators and a reference voltage network to detect the level of a signal at the analog input. Output Q1 is switched to a low logic level at a typical input voltage of 200mV with Threshold Adjust open and the cascade input grounded. After each 200mV increment, the next output is switched to a low logic level. All outputs are at low logic levels at a typical input voltage of 2000mV. The threshold–adjust pin allows the user to decrease the input voltage steps from 200mV to 100mV increments by connecting an external resistor from Threshold Adjust to GND.
NTE1507 Datasheet
