NTE977 Datasheet | NTE Electronics

Description : The NTE950, NTE951, and NTE977 are positive 3- terminal voltage regulators in available in a TO92 type package. With adequate heat sinking these regulators can deliver 100m A output current. Current limiting is included to limit peak output current to safe value. Safe area protection for the output transistors is provided to limit internal power dissipation. If internal power dissipation bees too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating. When used as a zener diode/resistor bination replacement, these devices usually result in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can provide local on card regulation, eliminating the distribution problems associated with single point regulation. Typical applications include use in logic systems, instrumentation, Hi Fi, and other solid state electronic equipment. Although designed primarily as fixed voltage regulators these devices can be used with external ponents to obtain adjustment voltages and currents. Features : D Output Voltage Tolerances of ±5% over the Temperature Range D Output Current of 100m A D Internal Thermal Overload Protection D Output Transistor Safe Area Protection D Internal Short Circuit Current Limit Absolute Maximum Ratings: Output Voltage, VOUT NTE977 - - - - - - - - - - - - - - 5V NTE950 - - - - - - - - - - - - - . . . . 12V NTE951 - - - - - - - - - - - - - . . . . 15V Input Voltage, VIN NTE977 - - - - - - - - - - - - - . . . . 30V NTE950,...