34932 Datasheet | NXP Semiconductors

feature provides a proportional (0.24% of the load current) current output suitable for monitoring by a microcontroller’s A/D input. A status flag output reports undervoltage, overcurrent, and overtemperature fault conditions. Two independent inputs provide polarity control of two half-bridge totem pole outputs. Two independent disable inputs are provided to force the H-Bridge outputs to tri-state (high-impedance off state). 34932 Industrial H-BRIDGE EK SUFFIX (PB-FREE) 98ASA99334D 54-PIN SOICW-EP Features - 5.0 V to 36 V continuous with 24 V nominal operating voltage (transient operation from 5.0 V to 40 V) - 235 mΩ maximum RDS(on) at TJ = 150 °C (each H-Bridge MOSFET) - 3.0 V and 5.0 V TTL/CMOS logic patible inputs - Output short-circuit protection (short to VPWR or GND) - Overcurrent limiting (regulation) via internal constant-off-time PWM - Temperature dependant current limit threshold reduction to allow for continuous operation without shutdown - All inputs have an internal source/sink to define the default (floating input) states - Sleep mode with current draw < 20 µA (each half with inputs floating or set to match default logic states) Applications - DC motor control - DC brushed and servo motor driver - Copiers, printers - Factory automation - POS, ATM, vending kiosks - Robotics - Security camera control - Ticketing, toll systems VPWR SFA FBA VPWRA CCPA OUT1 IN1 IN2 D1 EN/D2 IN3 IN4 D3 EN/D4 FBB OUT2 PGNDA AGNDA VPWRB CCPB OUT3 MOTOR VPWR MOTOR SFB...