Datasheet4U Logo Datasheet4U.com

34978 - 22-channel multiple switch detection interface

General Description

.

.

.

Key Features

  • a 24-to-1 analog multiplexer for reading the input channels as analog inputs. The analog selected input signal is buffered and provided on the AMUX output pin for the MCU to read. Independent programmable wetting currents are available as needed for the.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
3490 Linear Low Density Polyethylene TAISOX
34901 High-speed CAN Transceiver Freescale Semiconductor
34903 System Basis Chip - SBC Freescale Semiconductor
34904 System Basis Chip - SBC Freescale Semiconductor
34905 System Basis Chip - SBC Freescale Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
34972 Multiple Switch Detection Interface
34931 5.0A H-Bridge
34932 Dual 5.0A H-Bridge
34933 1.4A Dual H-Bridge Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NXP Semiconductors Technical Data 22 channel multiple switch detection interface with programmable wetting current Document Number: MC33978 Rev. 8.0, 7/2018 33978 34978 The 33978 is designed to detect the closing and opening of up to 22 switch contacts. The switch status, either open or closed, is transferred to the microprocessor unit (MCU) through a serial peripheral interface (SPI). This SMARTMOS device also features a 24-to-1 analog multiplexer for reading the input channels as analog inputs. The analog selected input signal is buffered and provided on the AMUX output pin for the MCU to read. Independent programmable wetting currents are available as needed for the application. A battery and temperature monitor are included in the IC and available via the AMUX pin.