Datasheet4U Logo Datasheet4U.com

74ABTL3205 - 10-bit BTL transceiver

General Description

This transceiver is a 10 bit bidirectional transceiver and is intended to provide the electrical interface to a high performance wired-OR bus.

The B-port drivers are Low-capacitance open collectors with controlled ramp and are designed to sink 100mA.

Key Features

  • 10-bit BTL transceiver.
  • Drives heavily loaded backplanes with equivalent load impedances down to 10 ohms.
  • High drive 100mA BTL open collector drivers on B-port.
  • Allows incident wave switching in heavily loaded backplane buses.
  • Reduced BTL voltage swing produces less noise and reduces power consumption.
  • Built-in precision band-gap reference provides accurate receiver thresholds and improved noise immunity.
  • Compatible with IEEE Future.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ABT00 Quad 2-input NAND gate Philips
74ABT00 Quad 2-input NAND gate nexperia
74ABT04 Hex inverter Philips
74ABT04 Hex inverter nexperia
74ABT04D Hex inverter nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74ABT00 Quad 2-input NAND gate
74ABT02 Quad 2-input NOR gate
74ABT04 Hex inverter
74ABT08 Quad 2-input AND gate
74ABT10 Triple 3-input NAND gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS 74ABTL3205 10-bit BTL transceiver with registers Product specification 1995 Jun 16 Philips Semiconductors Philips Semiconductors 10-bit BTL transceiver with registers Product specification 74ABTL3205 FEATURES • 10-bit BTL transceiver • Drives heavily loaded backplanes with equivalent load impedances down to 10 ohms • High drive 100mA BTL open collector drivers on B-port • Allows incident wave switching in heavily loaded backplane buses • Reduced BTL voltage swing produces less noise and reduces power consumption • Built-in precision band-gap reference provides accurate receiver thresholds and improved noise immunity • Compatible with IEEE Futurebus+ or proprietary BTL backplanes • Controlled output ramp and multiple GND pins minimize ground bounce • Tight output