Datasheet4U Logo Datasheet4U.com

74ALVCH16374 - 16-bit edge-triggered D-type flip-flop

General Description

The 74ALVCH16374 is 16-bit edge-triggered flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications.

Incorporates bus hold data inputs which eliminate the need for external pull-up or pull-down resistors to hold unused inputs.

Key Features

  • Wide supply voltage range from 1.2 V t.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVCH16374 LOW VOLTAGE CMOS 16-BIT D-TYPE FLIP-FLOP STMicroelectronics
74ALVCH16374 16-bit edge-triggered D-type flip-flop nexperia
74ALVCH16374 Low Voltage 16-Bit D-Type Flip-Flop Fairchild Semiconductor
74ALVCH16374 Low-Voltage 16-Bit D-Type Flip-Flop ON Semiconductor
74ALVCH16373 Low Voltage 16-Bit Transparent Latch Fairchild Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
74ALVCH16373 2.5V/3.3V 16-bit D-type transparent latch
74ALVCH162244 16-bit buffer/line driver
74ALVCH162245 16-bit bus transceiver
74ALVCH16244 2.5V/3.3V 16-bit buffer/line driver
74ALVCH16245 16-bit transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVCH16374 2.5 V/3.3 V 16-bit edge-triggered D-type flip-flop; 3-state Rev. 5 — 9 July 2012 Product data sheet 1. General description The 74ALVCH16374 is 16-bit edge-triggered flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications. Incorporates bus hold data inputs which eliminate the need for external pull-up or pull-down resistors to hold unused inputs. The 74ALVCH16374 consists of 2 sections of eight edge-triggered flip-flops. A clock (CP) input and an output enable (OE) are provided per 8-bit section. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH CP transition. When OE is LOW, the contents of the flip-flops are available at the outputs.