Datasheet4U Logo Datasheet4U.com

74HC151-Q100 - 8-input multiplexer

General Description

The 74HC151-Q100; 74HCT151-Q100 are 8-bit multiplexer with eight binary inputs (I0 to I7), three select inputs (S0 to S2) and an enable input (E).

One of the eight binary inputs is selected by the select inputs and routed to the complementary outputs (Y and Y).

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from 40 C to +85 C and from 40 C to +125 C.
  • Specified in compliance with JEDEC standard no. 7A.
  • Input levels:.
  • For 74HC151-Q100: CMOS level.
  • For 74HCT151-Q100: TTL level.
  • Low-power dissipation.
  • Non-inverting data path.
  • ESD protection:.
  • MIL-STD-883, method 3015 exceeds 2000 V.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V (C = 200 p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC151-Q100 8-input multiplexer nexperia
74HC151 8-Line To 1-Line Data Selectors/Multiplexers Texas Instruments
74HC151 8-input multiplexer Philips
74HC151 8-input multiplexer nexperia
74HC151D 8-Channel Multiplexer Toshiba

Other Datasheets by NXP Semiconductors

Part Number Description
74HC151D-Q100 8-input multiplexer
74HC151PW-Q100 8-input multiplexer
74HC153 Dual 4-input multiplexer
74HC154 4-to-16 line decoder/demultiplexer
74HC157 Quad 2-input multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC151-Q100; 74HCT151-Q100 8-input multiplexer Rev. 3 — 26 January 2015 Product data sheet 1. General description The 74HC151-Q100; 74HCT151-Q100 are 8-bit multiplexer with eight binary inputs (I0 to I7), three select inputs (S0 to S2) and an enable input (E). One of the eight binary inputs is selected by the select inputs and routed to the complementary outputs (Y and Y). A HIGH on E forces the output Y LOW and output Y HIGH. Inputs also include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.