Datasheet4U Logo Datasheet4U.com

BTS7202U - dual channel Receiver Front-End Module

General Description

The BTS7202U is a dual channel Receiver Front-End Module (RX FEM) available in an HVQFN40 package.

The BTS7202U is designed for 5G mMIMO Infrastructure applications.

The BTS7202U includes two independent receive channels each with a low noise amplifier (LNA).

Key Features

  • Operating frequency range 3.3 GHz.
  • 4.2 GHz.
  • Two independently operating channels.
  • 500 mW power dissipation per channel.
  • High gain RX mode power gain 36.5 dB.
  • Low gain RX mode power gain 19 dB.
  • Typical Noise Figure 0.95 dB.
  • High TX power handling 44.5 dBm (10.5 dB PAPR).
  • Single-ended input /output RF ports matched to 50 Ω.
  • Fast switching time between operation modes.
  • ESD protection on all pins.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BTS7200-2EPA Smart High-Side Power Switch Infineon
BTS7200-2EPC Smart High-Side Power Switch Infineon
BTS7200-4EPA Smart High-Side Power Switch Infineon
BTS720L1 Smart Four Channel Highside Power Switch Siemens Semiconductor Group
BTS721L1 Smart Four Channel Highside Power Switch Siemens Semiconductor Group

Other Datasheets by NXP Semiconductors

Part Number Description
BTS7203H RX Analog Front-End
BTS7205H 2.3GHz - 2.7GHz RX Analog Front-End Module
BTS7205U RX Analog Front-End Module
BTS6201U Wideband high linearity pre-driver amplifier
BTS6302U Wideband high linearity pre-driver amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
BTS7202U 3.3 GHz – 4.2 GHz RX Front-End Module Rev. 6 — 2 February 2023 Product data sheet 1 General description The BTS7202U is a dual channel Receiver Front-End Module (RX FEM) available in an HVQFN40 package. The BTS7202U is designed for 5G mMIMO Infrastructure applications. The BTS7202U includes two independent receive channels each with a low noise amplifier (LNA). The gain can be set to two different gain levels. Each channel also has a switch to route high-power TX signals to a termination load. The device is matched to 50 Ω. 2 Features and benefits • Operating frequency range 3.3 GHz – 4.2 GHz • Two independently operating channels • 500 mW power dissipation per channel • High gain RX mode power gain 36.5 dB • Low gain RX mode power gain 19 dB • Typical Noise Figure 0.