Datasheet4U Logo Datasheet4U.com

FXPS7550D4 - Digital absolute pressure sensor

General Description

The FXPS7550D4 high-performance, high-precision barometric absolute pressure (BAP) sensor consists of a compact capacitive micro-electro-mechanical systems (MEMS) device coupled with a digital integrated circuit (IC) producing a fully calibrated digital output.

Key Features

  • Absolute pressure range: 20 to 550 kPa.
  • Operating temperature range:.
  • 40 °C to 130 °C.
  • Pressure transducer and digital signal processor (DSP).
  • Digital self test.
  • I2C compatible serial interface.
  • Slave mode operation.
  • Standard mode, fast mode, and fast-mode plus support.
  • 32-bit SPI compatible serial interface.
  • Sensor data transmission commands.
  • 12-bit data for absolute pressure.
  • 8-bit data.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by NXP Semiconductors

Part Number Description
FXPS7550D4S Digital absolute pressure sensor
FXPS7115D4 Digital absolute pressure sensor
FXPS71407S DSI3 and PSI5 compatible absolute and relative pressure sensor
FXPS7165D4 Digital absolute pressure sensor
FXPS7250A4 Analog absolute pressure sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FXPS7550D4 Digital absolute pressure sensor, 20 to 550 kPa Rev. 5 — 15 July 2019 Product data sheet 1 General description The FXPS7550D4 high-performance, high-precision barometric absolute pressure (BAP) sensor consists of a compact capacitive micro-electro-mechanical systems (MEMS) device coupled with a digital integrated circuit (IC) producing a fully calibrated digital output. The sensor is based on NXP's high-precision capacitive pressure cell technology. The architecture benefits from redundant pressure transducers as an expanded quality measure. This sensor delivers highly accurate pressure and temperature readings through either a serial peripheral interface (SPI) or an inter-integrated circuit (I2C) interface. The FXPS7550D4 uses either a 3.3 V or 5.0 V power supply.