Datasheet4U Logo Datasheet4U.com

IP4234CZ6 - Single USB 2.0 ESD protection

Description

The IP4234CZ6 is designed to protect Input/Output (I/O) USB 2.0 ports, that are sensitive to capacitive loads, from being damaged by ElectroStatic Discharge (ESD).

Features

  • I Pb-free and RoHS compliant I Simple, direct signal routing provides for high speed signal integrity I ESD protection compliant to IEC 61000-4-2 level 4, ±8 kV contact discharge I Significant reduction in peak clamping and peak residual current I Four low input capacitance (2.0 pF typical) rail-to-rail ESD protection diodes I Low voltage clamping due to an integrated Zener diode I Small 6-lead SO6 (SOT457) package I IEC 61000-4-5 15 A Lightning (8/20 µs) compliant 1.3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IP4234CZ6 Single USB 2.0 ESD protection nexperia
IP4233CZ6 Ultra low capacitance ESD protection nexperia
IP4238CZ10 Surge protection NXP Semiconductors
IP4220CZ6 Dual USB 2.0 Integrated ESD protection to IEC 61000-4-2 level 4 Philips
IP4220CZ6 Dual USB 2.0 integrated ESD protection nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
IP4220CZ6 Dual USB 2.0 integrated ESD protection
IP4221CZ6-S ESD protection
IP4221CZ6-XS ESD protection
IP4223CZ6 Dual USB 2.0 integrated ESD protection
IP4264CZ8-10-TTL (IP4264CZ8-10/-20/-40-TTL) Integrated (U)SIM card passive filter array

Full PDF Text Transcription

Click to expand full text
IP4234CZ6 Single USB 2.0 ESD protection to IEC 61000-4-2 level 4 Rev. 01 — 16 April 2009 Product data sheet 1. Product profile 1.1 General description The IP4234CZ6 is designed to protect Input/Output (I/O) USB 2.0 ports, that are sensitive to capacitive loads, from being damaged by ElectroStatic Discharge (ESD). The π-filter structure is implemented with a small series resistor to provide the necessary protection to signal and supply components from ESD voltages greater than ±8 kV contact discharge according IEC 61000-4-2, level 4. The ESD protection is independent of the supply voltage due to the rail-to-rail diode architecture being connected to a Zener diode.
Published: |