JN5168-001-Myy Datasheet | NXP Semiconductors

Data Sheet: JN5168-001-Myy Jen Net-IP, Zig Bee PRO and IEEE802.15.4 Module Overview The JN5168-001-Myy family is a range of ultra low power, high performance surface mount modules targeted at IEEE 802.15.4, Jen Net-IP, Zig Bee Light Link, Zig Bee Smart Energy and RF4CE networking applications, enabling users to realise products with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites. The modules use NXP’s JN5168 wireless microcontroller to provide a prehensive solution with large memory, high CPU and radio performance and all RF ponents included. All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development. Four module variants are available: JN5168-001-M00 with an integrated antenna, JN5168-001M03 with an antenna connector and the JN5168-001-M05 and M06 with an antenna connector, power amplifier and LNA for extended range. The JN5168-001-M05 output power has been optimised for use in Europe and Asia. Module Block Diagram External Antenna Matching Integrated Antenna M00 Option u Fl Connector Matching M03 Option u Fl Connector PA / LNA Matching M05/M06 Option 2.4GHz Radio Including Diversity Power Management XTAL Watchdog Timer Voltage Brownout O-QPSK Modem Flash 8/32K 64/160/256K 32 -Bit RISC CPU IEEE802.15.4 MAC Accelerator 4k B EEPROM 128-bit AES Encryption Accelerator SPI Master & Slave 2-Wire Serial (Master/Slave) 4x PWM + Timers 2x UART 20 DIO Sleep Counter 4 Chan 10-bit ADC Battery and Temp...